American Standard Indoor Furnishings 0031000 User Manual

TOWN SQUARE® 27"  
PEDESTAL SINK  
FIRECLAY  
BARRIER FREE  
TOWN SQUARE® 27" PEDESTAL SINK  
• American classic design  
• Clean straight lines with classic ogee curves  
• Rear overflow  
• Supplied with mounting kit  
Design-matched to Town Square®  
fixture and faucets  
• Right Height™ for greater comfort during use  
• Made from fireclay  
0780.400 Faucet holes on 4" (102mm) centers  
0780.800 Faucet holes on 8" (203mm) centers  
0780.100 Center hole only  
Nominal Dimensions:  
27" x 21-1/4" x 36"  
(686 x 540 x 914mm)  
20-1/4" (514mm)  
4"  
2-5/8"  
(67mm)  
4"  
FINISHED WALL  
(102mm)  
(102mm)  
Separate Components:  
0780.004 Pedestal top 4" (102mm) centers  
0780.008 Pedestal top 8" (203mm) centers  
0780.001 Center hole only  
9-5/8"  
(244mm)  
5/8"  
(16mm)  
21-1/4"  
(540mm)  
1-3/4" DIA.  
STD. DRAIN  
OUTLET  
0031.000 Pedestal only  
Bowl sizes:  
15" (381mm) wide  
12-1/2 (318mm) front to back  
6-1/2" (165mm) deep  
PED BASE  
OUTLINE  
PED TOP  
OUTLINE  
27"  
(686mm)  
3-3/4" (95mm)  
DRAIN  
CHASE  
8"  
(203mm)  
3/8" (10mm) DIA.  
SLAB ANCHOR  
SCREW HOLES  
ON 20-1/4" (514mm)  
CTRS  
Compliance Certifications -  
6"  
Meets or Exceeds the Following Specifications:  
• ASME A112.19.9M for Non-Vitreous Ceramic Fixtures  
• CAN/CSA B45 Series  
(152mm)  
SUPPLIES AS  
REQUIRED  
36"  
(914mm)  
1-1/4" O.D.  
WASTE  
1-1/4" O.D.  
TAILPIECE  
24"  
*
(610mm)  
28"  
(711mm)  
OPEN  
TO  
FLOOR  
22"  
*
(559mm)  
To Be Specified:  
Color: White Bone Linen  
3/8" (10mm) DIA.  
BASE ANCHOR  
SCREW HOLES  
ON 6" (152mm)  
CTRS  
Silver Black  
Town Square Faucet:  
Centerset Lavatory Faucet: 2555.201  
Widespread Lavatory Faucet: 2555.801  
(shown)  
10"  
(254mm)  
FINISHED  
FLOOR  
6"  
(152mm)  
Other Lavatory Faucet*:  
Faucet Finish:  
Supplies:  
NOTES:  
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE  
*
SUGGESTED.  
PEDESTAL ANCHORING SCREWS NOT INCLUDED.  
FOR REINFORCEMENT ONLY. TAKE ACTUAL DIMENSIONS FROM  
FIXTURE.  
1-1/4" Trap:  
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.  
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.  
INSTALLATION INSTRUCTIONS SUPPLIED WITH LAVATORY.  
* See faucet section for additional models available  
IMPORTANT: Dimensions of fixtures are nominal and may vary within the  
range of tolerances established by ANSI Standard A112.19.9M.  
These measurements are subject to change or cancellation. No responsibility  
is assumed for use of superseded or voided pages.  
J3  
© 2008 AS America Inc.  
Revised 2/08  
 

888 Digital Dishwasher ASDA A2 User Manual
ADC Clothes Dryer AD 758DV User Manual
AGFA All in One Printer 1815 Copier User Manual
Aiphone Intercom System TB 6H User Manual
Americana Appliances Range ABS200 User Manual
Atlona TV Cables AT WHD200 User Manual
Audiovox Car Stereo System AVD300T User Manual
Axis Communications Security Camera 212 PTZ User Manual
Behringer Universal Remote DR600 User Manual
Beko Coffeemaker bkk2113 User Manual