FREE 24-hour Tech Support: 724-746-5500
blackbox.com
© 2007. All rights reserved. Black Box Corporation.
Du a l-Sp e e d 10/100 St a cka b le Hu b
Combine your 10-Mbps devices in the same netw ork
as your 100-Mbps devices. The Hub automatically
senses the speed of each device.
TECH SPECS
Performance:
Power Supply (Internal):
Data Rate — 100 or 10 Mbps, per port, autosensing for speed. The hub
supports two traffic domains, one at 10 Mbps and one at 100 Mbps,
operating concurrently.
AC Power Connector — IEC-type, male recessed, rear of chassis
Power Input Voltage — 90 to 260 VAC (auto ranging)
Power Input Frequency — 47 to 63 Hz
PDV (100 M Path Delay Value) — 80BT exceeds Class II specification
Auto-Reconnect — Occurs after one packet of error-free reception;
Internal Switch or Bridge in Master models (one Master per stack, optional,
to interconnect the two traffic domains):
Processing Type— Store and forward
Address Table — 8 KB, self-learning
Packet Buffers — 2 MB, dynamically allocated and shared on both sides
Latency (not including packet time) — 10 to 100 Mbps: 5 microseconds,
100 to 10 Mbps: 5 microseconds
Power Consumption — 20 watts max.
48-VDC Power Supply (Optional):
Input — 36 to 72 VDC (auto-ranging)
Terminal Block, in rear — -, GND, +
Power Consumption —
LH8000A-M & C: 20 watts;
LH8016A-M & C: 30 watts
Mechanical:
Enclosure — Rugged high-strength sheet metal. Suitable for standalone
or shelf-mounting. Metal brackets for optional wallmounting
included.
Cooling Method — Fan cooled, internal @ 9 cfm
Size — LH8000A-M & C: 1.4"H x 8.5"W x 9.75"D (3.5 x 21.6 x 25 cm);
LH8016A-M & C: 1.7"H x 17"W x 9"D (4.4 x 43.2 x 22.9 cm)
Weight — LH8000A-M & C: 2.5 lb. (1.15 kg);
LH8016A-M & C: 4 lb. (1.8 kg)
Network Standards:
100 Mbps — IEEE 802.3u, 100BASE-TX
10 Mbps — IEEE 802.3, 10BASE-T
Auto Speed-Sensing — IEEE 802.3u
LH8000A
Operating Environment:
Ambient Temperature — 32 to 120°F (0 to 50°C)
Storage — -5 to +140°F (-20 to +60°C)
Ambient Relative Humidity — 10 to 95% (noncondensing)
Network Cable Connectors: (8) or (16) RJ-45 shielded female;
100 Mbps: Category 5 UTP/STP; 10 Mbps: Category 3, 4, 5 UTP
NOTE: Use Media Converters to connect to fiber media.
Stacking Cable: A stacking cable with 50-pin HSSI male connectors,
shielded, 9 inches (23 cm) long, is included with each client unit.
Switch, Manual: Uplink: Converts RJ-45 port #8 from a regular
(= position) user-segment port to a crossover (X position) uplink port
for on-off connection to a central hub or another cascaded hub.
LED Indicators on Chassis:
PWR — Steady on when power is applied
BR — Steady on if unit has bridge inside
ACT — Common packet activity indicator, one for 100-Mbps domain and
one for 10-Mbps domain
COL —Common collision indicator, one for 100-Mbps domain and one for
10-Mbps domain
LED Indicators per RJ-45 Port:
100 — Steady on when the port senses operation at 100-Mbps speed
LK — Steady on when twisted-pair link is operational
RX — Flashing when there is activity (receiving data) on the port
WHAT‘S INCLUDED
YOU MAY ALSO NEED…
✦ 8- or 16-Port Dual-Speed 10/100 Stackable Hub
✦ Stacking cable
✦ An internal power supply
✦ Cooling fan
•
•
•
Category 5 cable for 100-Mbps connections
Category 3, 4, or 5 cable for 10-Mbps connections
48-VDC power supply (call Technical Support for ordering
information)
✦ Metal brackets for shelf- or wallmounting
✦ User’s manual
Item
Code
Dual-Speed 10/100 Stackable Hub, 8-Port
Master
Client
LH8000A-M
LH8000A-C
Rackmount Dual-Speed 10/100 Stackable Hub, 16-Port
Master
Client
LH8016A-M
LH8016A-C
10/29/2007
#20091
724-746-5500
blackbox.com
3 of 3
|
Bissell Pet Care Product 33N7 User Manual
Black Decker Can Opener KEC500 User Manual
Black Decker Fryer SKG110 User Manual
Black Decker Iron F980 User Manual
Bolens Trimmer 249 596 000 User Manual
Bosch Power Tools Nail Gun FNS250 16 User Manual
Bosch Power Tools Sander 1275DVS User Manual
Braun Thermometer IRT 3020 CO User Manual
Cal Flame Hot Tub Spa Home Resort User Manual
Cisco Systems Computer Accessories OL 4344 01 User Manual