Owner’s manual
Mode d’emploi
Manual de instrucciones
HIGH-FIDELITY AM/FM CD PLAYER
•
LECTEUR AM/FM CD HAUTE FIDELITE
•
REPRODUCTOR DE CD CON AM/FM DE ALTA FIDELIDAD
Thank you for purchasing this Clarion product.
∗ Please read this owner’s manual in its entirety before operating this equipment.
∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment).
∗ Check the contents of the enclosed warranty card and keep it carefully with this manual.
∗ This manual includes the operating procedures of the CD changer and TV tuner connected via the
CeNET cable. The CD changer and TV tuner have their own manuals, but no explanations for oper-
ating them are described.
Contents
1. FEATURES...................................................................................................................................... 2
2. PRECAUTIONS .............................................................................................................................. 3
Handling Compact Discs ................................................................................................................. 4
Digital Wiring ................................................................................................................................... 4
3. CONTROLS .................................................................................................................................... 5
4. NOMENCLATURE .......................................................................................................................... 6
Names of the Buttons and their Functions ...................................................................................... 6
Major Button Operations when External Equipment is Connected to this Unit................................ 7
Display Items ................................................................................................................................... 8
5. REMOTE CONTROL ....................................................................................................................... 9
Inserting the Batteries ...................................................................................................................... 9
Functions of Remote Control Unit Buttons .................................................................................... 10
6. OPERATIONS ................................................................................................................................11
Basic Operations ............................................................................................................................11
Radio Operations ........................................................................................................................... 13
CD Operations ............................................................................................................................... 14
Operations Common to Each Mode .............................................................................................. 16
7. OPERATIONS OF ACCESSORIES .............................................................................................. 25
CD Changer Operations ................................................................................................................ 25
TV Operations................................................................................................................................ 27
8. IN CASE OF DIFFICULTY ............................................................................................................ 29
9. ERROR DISPLAYS ....................................................................................................................... 30
10. SPECIFICATIONS ......................................................................................................................... 30
APPENDIX : TIME ALIGNMENT LIST ................................................................................................ 32
MEMO : SOUND SETUP MEMO......................................................................................................... 34
1. FEATURES
• 96kHz High sampling conversion sound
• Burr Brown DACs / 0.5dB STEP Burr Brown Volume
• 6N 8ch / MAX 8 Volt Gold Plated RCA Line Level Output and 4-Channel RCAAUX Input with 3 Level
Adjustments
• 0.7cm STEP Time alignment / 4WAY Cross-Over / 5-BAND Parametoric EQ
• Direct (Front+Rear+Non-fader) / Standard (Front2Way+Rear+SUB) / 4-Way Multi Mode
• Alminum Upper Covered DC-DC converter
• CeNET with Balanced Audio Line Transmission and Dynamic Noise Canceling
• IR Remote Control Included
2
DRZ9255
Handling Compact Discs
2. PRECAUTIONS
•
•
•
Do not use compact discs that have large
scratches, are misshapen, cracked, etc. Use of
such discs may cause misoperation or damage.
Use only compact discs bearing the
or
1. When the inside of the car is very cold and the
player is used soon after switching on the
heater moisture may form on the disc or the
optical parts of the player and proper playback
may not be possible. If moisture forms on the
disc, wipe it off with a soft cloth. If moisture
forms on the optical parts of the player, do not
use the player for about one hour. The
condensation will disappear naturally allowing
normal operation.
mark.
2. Driving on extremely bumpy roads which
cause severe vibration may cause the sound
to skip.
Do not play heart-shaped, octagonal, or other
specially shaped compact discs.
To remove a compact disc from its storage case,
press down on the center of the case and lift the
disc out, holding it carefully by the edges.
3. This unit uses a precision mechanism. Even in
the event that trouble arises, never open the
case, disassemble the unit, or lubricate the
rotating parts.
Some CDs recorded in CD-R/CD-RW mode
may not be usable.
Do not use commercially available CD
protection sheets or discs equipped with
stabilizers, etc. These may damage the disc or
cause breakdown of the internal mechanism.
Handling
•
Compared to ordinary music CDs, CD-R and
CD-RW discs are both easily affected by high
temperature and humidity and some of CD-R
and CD-RW discs may not be played. Therefore,
do not leave them for a long time in the car.
Storage
•
•
•
Do not expose compact discs to direct sunlight
or any heat source.
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
CAUTION
Do not expose compact discs to excess
humidity or dust.
• New discs may have
some roughness
USE OF CONTROLS, ADJUSTMENTS, OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN, MAY
RESULT IN HAZARDOUS RADIATION
EXPOSURE.
Ball-point pen
Roughness
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation.
around the edges. If
such discs are used,
the player may not
work or the sound
may skip. Use a ball-
point pen or the like
to remove any
Do not expose compact discs to direct heat
from heaters.
This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation.
Cleaning
THE COMPACT DISC PLAYER and MINI DISC
PLAYER SHOULD NOT BE ADJUSTED OR
REPAIRED BY ANYONE EXCEPT PROPERLY
QUALIFIED SERVICE PERSONNEL.
•
•
•
To remove fingermarks and dust, use a soft
cloth and wipe in a straight line from the center
of the compact disc to the circumference.
roughness from the edge of the disc.
Do not use any solvents, such as commercially
available cleaners, anti-static spray, or thinner
to clean compact discs.
CHANGES OR MODIFICATIONS NOT
EXPRESSLYAPPROVED BY THE
MANUFACTURER FOR COMPLIANCE COULD
VOID THE USER’S AUTHORITY TO OPERATE
THE EQUIPMENT.
•
Never stick labels on the surface of the compact
disc or mark the surface with a pencil or pen.
• Never play a compact disc with any
cellophane tape or other glue on it or with
peeling off marks. If you try to play such a
compact disc, you may not be able to get it
back out of the CD player or it may damage
the CD player.
If this equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to consult the dealer or
an experienced radio/TV technician for help.
After using special compact disc cleaner, let
the compact disc dry off well before playing it.
INFORMATION FOR USERS:.
CHANGES OR MODIFICATIONS TO THIS
PRODUCT NOT APPROVED BY THE
MANUFACTURER WILL VOID THE WARRANTY
AND WILL VIOLATE FCC APPROVAL.
Digital Wiring
About Reset
•
When the digital input of a DVD changer is
connected, read the Owner's Manual provided
with the DVD changer, and change "AUDIO
OUT" in the "GENERAL SET UP" menu to
"SPDIF/PCM".
Digital Output
•
When a 5.1ch surround decoder is connected,
switch the set to direct mode.
MODEL
12V
GROUND
When "AUDIO OUT" is set to "SPDIF/RAW",
DIGITAL/dts audio is not output. Also, noise is
sometimes output.
AM 530-1710kHz/FM 87.9-107.9MHz
Digital Intput
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED
OPERATION.
• When the optical digital cable is connected to
or disconnected from this set later, press the
function button while holding down direct
buttons [1] and [6] with the power OFF to
perform a system check.
THIS PRODUCTION COMPLIES WITH DHHS RULES 21 CFR
SUBCHAPTER
J
APPLICABLE AT DATE OF MANUFACTURE.
CLARION CO.,LTD.
Though pressing the reset button also
performs a system check, the contents of
memory will be erased completely in this
case.
50 KAMITODA,TODA-SHI,SAITAMA-KEN,JAPAN
MANUFACTURED:
Clarion Co.,Ltd.
MADE IN
SERIAL No.
PE-
Bottom View of Source Unit
Be sure to unfold and read the next page. / Veuillez déplier et vous référer à la page suivante.
Cerciórese de desplegar y de leer la página siguiente.
DRZ9255
3
DRZ9255
4
3.CONTROLS / LES COMMANDES / CONTROLES
Source unit / Appareil pilote / Unidad fuente
4. NOMENCLATURE
Note:
• Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold).
Names of the Buttons and their Functions
[
]
ROTARY
[ROTARY] knob
[BAND] button
[
]
CD SLOT
[Q]
[
]
A M
•
Adjust the volume by turning the knob
clockwise or counterclockwise.
•
Switch the band, or seek tuning or manual
tuning while in the radio mode.
•
Mute the sound. When the knob is pressed
and held for 1 second or longer, the volume is
changed from 1db steps to 0.5db steps.
•
Play a first track while in the CD mode.
[A], [D] buttons
•
Select a station while in the radio mode or
select a track when listening to a CD. These
buttons are used to make various settings.
Press and hold the button for 1 second or
longer to switch the fast-forward/fast-
backward.
[Q] button
Eject a CD when it is loaded into the unit.
[CD SLOT]
CD insertion slot.
[SCN] button
•
•
•
[s] button
• Play or pause a CD while in the CD mode.
•
Perform scan play for 10 seconds of each
track while in the CD mode.
[
]
BAND
[ ]
DISP
[s]
[
]
ADJ
[
]
[FUNC] button
FUNC
[
]
P/A
[RPT] button
Repeat play while in the CD mode.
•
Press the button to turn on the power.
Press and hold the button for 1 second or
longer to turn off the power.
•
[A], [D]
[RDM] button
Perform random play while in the CD mode.
•
[
][
][
]
[
]
[
], [ ], [ ], [
]
[
], [
]
•
Switches the operation mode among the
radio mode, etc.
SCN RPT RDM
DIRECT
DOWN UP
[DIRECT] buttons
•
Store a station into memory or recall it
directly while in the radio mode.
[DISP] button
•
Switch the display indication (Main display,
Sub display, Clock display).
[
•
], [ ] , [ ] , [ ] buttons
Select items in the Adjust mode.
[ADJ] button
•
•
Press the button to enter the adjust mode.
When the button is pressed and held for 1
second or longer, the title is scrolled.
[UP], [DOWN] buttons
Select the disc.
•
[P/A] button
[A-M] button
•
Perform preset scan while in the radio mode.
When the button is pressed and held, auto
store is performed.
•
Use the button to switch to the audio mode
(bass/treble, balance/fader)
•
Hold down for at least one second to turn the
display OFF.
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.
Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre.
Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas.
5
DRZ9255
6
Download from Www.Somanuals.com. All ManDuRaZ9ls255Search And Download.
Major Button Operations when External Equipment is
Connected to this Unit
GWhen the CD/DVD changer is
GWhen the TV is connected
∗ For details, see the section “TV
operations”.
connected
∗ For details, see the section “CD changer
operations”. For the DVD changer, refer to
the Owner’s Manual provided with the
DVD changer.
[DIRECT] buttons
•
Store a station into memory or recall it
directly.
[SCN] button
[P/A] button
• Perform scan play for 10 seconds of each
track. Disc scan play is performed when the
button is pressed and held.
•
Perform preset scan while in the TV mode.
When the button is pressed and held, auto
store is performed.
[RPT] button
[BAND] button
• Perform repeat play. When this button is
pressed and held, disc repeat play is
performed.
•
•
Switch the band.
Press and hold the button to switch between
seek tuning or manual mode.
[RDM] button
[A], [D] buttons
Select a station.
• Perform random play. Also perform disc
random play when the button is pressed and
held.
•
[s] button
•
Switch the TV picture mode or VTR (external)
picture mode.
[UP], [DOWN] buttons
• Select the disc.
[BAND] button
• Move the next disc in increasing order.
[A], [D] buttons
• Select a track when listening to a disc.
• Press and hold the button for 1 second or
longer to switch the fast-forward/fast-
backward.
[s] button
• Play or pause a CD or DVD.
[DISP] button
• Press and hold the button to switch between
the user titles or track titles, etc. while in the
CD changer mode.
DRZ9255
7
Display Items
: Filter indication
: Speaker indication
: Disc indication
: Scan indication
: Repeat indication
: Random indication
: Mute indication
: Manual indication
: Stereo indication
: Enter indication
Operation status indication
Titles, frequency, clock, etc. are displayed.
: Cursor indication
: Range adjustment indication
D8ownl
D
o
R
a
Z9
d
25f
rom Www.Somanuals.com. All Manuals Search And Download.
5
5. REMOTE CONTROL
Receiver for remote control unit
Operating range: 30˚ in all directions
Signal transmitter
Remote control unit
[
[
]
]
SCN
RPT
[
[
]
FNC
[
]
RDM
]
BND
[
[
[
]
]
DISC
],[
]
DISP
[
],[
]
[
]
[
[
[
]
ADJ
],[
]
[
]
MUTE
]
A-M
[
]
PS/AS
[
], [
]
Inserting the Batteries
Rear cover
1. Turn the remote control over, and remove the
rear cover with a sharp-pointed object while
pressing in the direction of the arrow.
2. Insert batteries (CR2025) making sure that they
face the directions shown in the figure.
Rear side
3. Press in the cover until you hear it click into place.
Notes:
CR2025 Battery
Using batteries improperly can cause them to
explode. Take note of the following points:
• When replacing batteries, replace both batteries
with new ones.
• Do not short-circuit, disassemble or heat batteries.
• Do not dispose of batteries into fire or flames.
• Dispose of spent batteries properly.
DRZ9255
9
Functions of Remote Control Unit Buttons
6. OPERATIONS
Basic Operations
CD changer
DVD changer
Mode
Button
Note:Be sure to read this chapter referring to the front diagrams of
Radio
CD
TV
chapter “3. CONTROLS” on page 5 (unfold).
Switches among radio, CD, CD changer, DVD changer, TV and AUX.
[FNC]
Adjusting the volume
Turning the [ROTARY] knob clockwise increases
the volume; turning it counterclockwise
decreases the volume.
∗ The volume level is from ---- (minimum) to +6dB
(maximum).
CAUTION
Be sure to lower the volume before
Plays the first track.
Top play.
Moves the next disc in
increasing order.
Switches reception
band.
Switches reception
band.
[BND]
switching off the unit power or the ignition
key. The unit remembers its last volume
setting. If you switch the power off with the
volume up, when you switch the power back
on, the sudden loud volume may hurt your
hearing and damage the unit.
[
[
] , [
] , [
]
]
Increases and decreases volume (in all modes).
Tunes in the desired
station.
Moves tracks up and down.
When pressed and held for 1 second:
Fast-forward/fast-backward.
Tunes in the desired
TV station.
∗ Holding down the [ROTARY] knob switches the
volume from 1dB steps to 0.5dB steps.
[
]
No function.
Switches between playback and pause.
Switches between TV
and VTR.
Mute the sound
[MUTE]
[DISP]
Turns mute on and off. Holding down the button for about one second changes the volume from 1dB
steps to 0.5dB steps.
Turning on/off the power
To mute the volume during playback, press the
[ROTARY] knob.
Note:
Switches among main display, sub display, clock display.
• Be careful about using this unit for a long time
without running the engine. If you drain the car’s
battery too far, you may not be able to start the
engine and this can reduce the service life of the
battery.
Scan play.
Scan play.
[SCN]
[1]
When pressed and
held for 1 second:
Disc scan play.
Switching the display
Press the [DISP] button to select the desired
display.
1. Press the [FUNC] button.
Repeat play.
Repeat play.
[RPT]
[2]
Each time you press the [DISP] button, the
display switches in the following order:
When pressed and
held for 1 second:
Disc repeat play.
2. The illumination and display on the unit light
up. The unit automatically remembers its last
operation mode and will automatically switch
to display that mode.
Recalls the station in
the memory.
When pressed and
held for 1 second:
Manual memory.
Recalls the station in
the memory.
Main display
Sub display
Clock display
Random play.
[RDM]
[3]
When pressed
Random play.
When pressed and
held for 1 second:
Disc random play.
and held for 1 second:
Manual memory.
3. Press and hold the [FUNC] button for 1
second or longer to turn off the power for the
unit.
Note:
• System check
The first time this unit is turned on after the wire
connections are completed, it must be checked
what equipment is connected. When the power is
turned on, “SYSTEM CHK” and “Push POWER”
appear in the display alternately, so press the
[FUNC] button. The system check starts within
the unit. When the system check is complete,
press the [FUNC] button again.
[4]:Disk down.
[6]:Disk up.
[DISC]
[4][6]
No function.
No function.
No function.
[5]
[
][ ][ ][
]
Select items in the Adjust mode.
Preset scan.
Scan play.
Scan play.
[PS/AS]
[ADJ]
Preset scan.
When pressed and
held for 2 seconds:
Auto store.
When pressed and
held for 2 seconds:
Auto store.
Enters the adjust
mode.
Enters the adjust
mode.
When pressed and
held for 1 second:
Title scroll.
(This function is only
for CD changer.)
Enters the adjust
mode.
When pressed and
held for 1 second:
Title scroll.
Enters the adjust
mode.
Selecting a mode
1. Press the [FUNC] button to change the
operation mode.
Main display
∗ Once selected, the preferred display becomes
the display default. When a function
adjustment such as volume is made, the
screen will momentarily switch to that
function’s display, then revert back to the
preferred display several seconds after the
adjustment.
2. Each time you press the [FUNC] button, the
operation mode changes in the following
order:
Adjusts the tone, the balance, and the fader.
When pressed and held for 1 second: Display off.
[A-M]
Radio mode ➜CD mode ➜ CD changer
mode ➜ DVD changer mode ➜ TV mode ➜
AUX mode ➜ Radio mode...
∗ Some of the corresponding buttons on the main unit and remote control unit have different functions.
∗ External equipment not connected with
CeNET is not displayed.
10
DRZ9255
DRZ9255
11
Basic Operations
Radio Operations
GStep tuning:
Turning on/off the display
Adjusting the bass/treble
This function is used to set the tone in more
detail for listening.
FM reception
®
Press the [A] or [D] button to manually
You can turn the display ON/OFF by holding the
[A-M] button down for at least one second.
You can also turn the display ON by pressing
the [DISP] button while the display is OFF.
For enhanced FM performance the
tune in a station.
tuner includes signal actuated stereo control,
Enhanced Multi AGC, Impulse noise reduction
curcuits and Multipath noise reduction circuits.
• The tone can be adjusted when the Equalizer
mode is set to "BASS/TREB".
∗ This can be adjusted when the Audio mode is the
Standard mode or the Multi mode.
Recalling a preset station
A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exist to store individual radio
stations in memory. Pressing the corresponding
[DIRECT] button recalls the stored radio
frequency automatically.
Listening to the radio
1. Press the [FUNC] button and select the radio
Adjusting the tone
Press the [A-M] button and select the item to
adjust. Each time you press the [A-M] button,
the item changes in the following order:
∗ "BASS" and "TREB" are displayed when "BASS/
TREB" are selected at EQ SELECT.
∗ The factory default setting is "0 dB".
1. Press the [A-M] button to select "BASS" or
"TREB".
mode. The frequency appears in the display.
2. Press the [BAND] button and select the radio
band. Each time the button is pressed, the
radio reception band changes in the following
order:
1. Press the [BAND] button and select the
desired band (FM or AM).
2. Press the [ ] or [ ] button to adjust the
output volume.
2. Press the corresponding [DIRECT] button to
recall the stored station.
FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1...
GWhen “STD” is set
“SW-VOL” ∗1 ➜ “BASS” ∗2 ➜ “TREBLE” ∗2
“BAL” ➜ “FADER” ➜ Last function mode.
∗ The adjustment range is -12 dB to +12 dB
3. Press the [A-M] button several times to
∗ Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store that station
into preset memory.
3. Press the [A] or [D] button to tune in the
➜
desired station.
return to the previous mode.
GWhen “DIRECT” is set
Tuning
Manual memory
1. Select the desired station with seek tuning,
manual tuning or preset tuning.
“N-FAD VOL” ➜ “BAL” ➜ “FADER” ➜
Last function mode.
There are 3 types of tuning mode available, seek
tuning, manual tuning and preset tuning.
Adjusting the balance/fader
• "FADER" (fader) can be adjusted when the
Audio mode is the Standard mode or the
Direct mode.
∗ The factory default setting is "0".
1. Press the [A-M] button to select "BAL" or
"FADER".
GWhen “MULTI” is set
Seek tuning
1. Press the [BAND] button and select the
desired band (FM or AM).
2. Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
station into preset memory.
“SW-VOL” ∗1 ➜ “BASS” ∗2 ➜ “TREBLE” ∗2
“BAL” ➜ Last function mode.
∗1 The item can be adjusted when the sub-woofer
setting is not set to "OFF".
∗2 The item can be adjusted when "EQ SELECT" in
the Adjust mode is set to "BASS/TREB".
➜
∗ If “MANU” is lit in the display, press and hold
the [BAND] button for 1 second or longer.
“MANU” in the display goes off and seek
tuning is now available.
Auto store
Auto store is a function for storing up to 6
stations that are automatically tuned in
sequentially. If 6 receivable stations cannot be
received, a previously stored station remains
unoverwritten at the memory position.
2. Press the [ ] or [ ] button to adjust the
volume.
2. Press the [A] or [D] button to
GAdjusting the balance (volume of the left
and right speakers)
To enhance the left side, press the [ ] button.
automatically seek a station.
Adjusting the volume of sub-
When the [D] button is pressed, the station
is sought in the direction of higher
frequencies; if the [A] button is pressed,
the station is sought in the direction of lower
frequencies.
woofer/non-fader output
These items can be adjusted when the sub-
woofer/non-fader setting is "ST" (stereo) or
"MONO" (monaural).
∗ The factory default setting is "0.0 dB".
1. Press the [A-M] button to select "SW-VOL"
or "N-FAD VOL".
1. Press the [BAND] button and select the
To enhance the right side, press the [
button.
]
desired band (FM or AM).
2. Press and hold the [P/A] button for 2
seconds or longer. The stations with good
reception are stored automatically to the
preset channels.
∗ The adjustment range is L13 to R13.
GAdjusting the fader (volume of the front
and rear speakers)
To enhance the rear side, press the [ ] button.
Manual tuning
There are 2 ways available: Quick tuning and
step tuning.
∗ If auto store is performed in the FM bands, the
stations are stored in FM3 even if FM1 or FM2
was chosen for storing stations.
∗ Select "SW-VOL" when the Audio mode is the
Standard mode or the Multi mode, and "N-
FAD VOL" when the Audio mode is the Direct
mode.
To enhance the front side, press the [
button.
]
When you are in the step tuning mode, the
frequency changes one step at a time. In the
quick tuning mode, you can quickly tune the
desired frequency.
Preset scan
Preset scan receives the stations stored in
preset memory in order. This function is useful
when searching for a desired station in memory.
∗ The adjustment range is R12 to F12.
3. Press the [A-M] button several times to
2. Press the [ ] or [ ] button to set the output
volume.
1. Press the [BAND] button and select the
return to the previous mode.
desired band (FM or AM).
∗ The adjustment range is -10.0 dB to +10.0 dB
(0.5 dB steps).
1. Press the [P/A] button.
∗ If “MANU” is not lit in the display, press and
hold the [BAND] button for 1 second or longer.
“MANU” is lit in the display and manual tuning
is now available.
2. When a desired station is tuned in, press the
[P/A] button again to continue receiving that
station.
3. Press the [A-M] button several times to
return to the previous mode.
2. Tune in a station.
Note:
• Be careful not to press and hold the [P/A] button
for 2 seconds or longer, otherwise the auto store
function is engaged and the unit starts storing
stations.
GQuick tuning:
Press and hold the [A] or [D] button for 1
second or longer to tune in a station.
12
DRZ9255
DRZ9255
13
CD Operations
CD Operations
Note:
Loading a CD
Scan play
• If the CD playing is not a CD-text CD or no user
title has been input, “NO TITLE” appears in the
display.
Insert a CD into the center of the CD SLOT with
the labeled side facing up. “LOADING” appears
in the display, the CD enters into the slot, and
the play starts.
The scan play locates and plays the first 10
seconds of each track on a disc automatically.
This function continues on the disc until it is
cancelled.
Ejecting a CD
∗ The scan play is useful when you want to select a
For CD (12 cm)
For single CD (8 cm)
CD SLOT
1. Press the [Q] to eject the CD. Take it out
from the ejected position.
desired track.
1. Press the [SCN] button to start scan play.
“SCN” lights in the display.
Note:
• If you force a CD into before auto reloading, the
CD can be damaged.
∗ If a CD (12 cm) is left in the ejected position for 15
seconds, the CD is automatically reloaded (Auto
reload).
2. To cancel the scan play, press the [SCN]
button again. “SCN” goes off from the
display and the current track continues to
play.
∗ 8 cm CDs are not auto reloaded. Be sure to remove
it when ejected.
Repeat play
Notes:
The repeat play continuously plays the current
track. This function continues automatically until
it is cancelled.
• Never insert foreign objects into the CD SLOT.
• If the CD is not inserted easily, there may be
another CD in the mechanism or the unit may
require service.
Selecting a track
GTrack-up
1. Press the [RPT] button. “RPT” lights in the
1. Press the [D] button to move ahead to the
• Discs not bearing the
or
mark and
display and the current track is repeated.
beginning of the next track.
CD-ROMs cannot be played by this unit.
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
Loading 8 cm compact discs
∗ No adapter is required to play an 8 cm CD.
2. To cancel the repeat play, press the [RPT]
button again. “RPT” goes off from the display
and normal play resumes.
2. Each time you press the [D] button, the
track advances ahead to the beginning of the
next track.
GTrack-down
Random play
1. Press the [A] button to move back to the
∗ Insert the 8 cm CD into the center of the insertion
slot.
beginning of the current track.
The random play selects and plays individual
tracks on a disc in no particular order. This
function continues automatically until it is
cancelled.
2. Press the [A] button twice to move to the
beginning of the previous track.
Listening to a CD already inserted
Press the [FUNC] button to select the CD mode.
Play starts automatically. If no CD is loaded in
the unit, “NO DISC” appears in the display.
1. Press the [RDM] button. “RDM” lights in the
display, an individual track is selected
randomly and play begins.
Fast-forward/fast-backward
GFast-forward
Press and hold the [D] button for 1 second or
2. To cancel the random play, press the [RDM]
button again. “RDM” goes off from the display
and normal play resumes.
longer.
Pausing play
1. Press the [s] button to pause play.
“PAUSE” appears in the display.
GFast-backward
Press and hold the [A] button for 1 second or
2. To resume CD play, press the [s] button
longer.
again.
Top function
The top function resets the CD player to the first
track of the disc. Press the [BAND] button to
play the first track (track No. 1) on the disc.
Displaying CD titles
This unit can display title data for CD-text CDs
and user titles input with this unit.
1. Press the [DISP] button to display the title.
2. Each time you press and hold the [DISP]
button for 1 second or longer, the title
display changes in the following order:
CD-text title (disc) ➜ Artist name ➜ CD-text
title (track) ...
14
DRZ9255
DRZ9255
15
Operations Common to Each Mode
Operations Common to Each Mode
7. Press the [ ] button.
Setting the clock
Selecting the sampling frequency
(SAMPLING)
GAbout the sampling frequency
You can switch between 96 kHz and 48 kHz as
the sampling frequency.
Adjusting the filter (FILTER/X-
This unit displays the time when the car engine
is running (ACC ON).
8. Press the [ ] or [ ] button to select the
speaker adjustment item. Each press of the
buttons switches the adjustment item.
OVER)
The filter can be adjusted for each speaker. For
details, see "About filter settings" (page 18).
The clock is displayed in 12-hour format.
• When a navigation system is connected, the
clock cannot be adjusted as clock data is sent
from the navigation system.
∗ The filter can be adjusted when the Audio mode is
the Standard mode or the Multi mode.
When the sampling frequency is set to 96 kHz,
high band spread, depth of tones and
transparency of sound are improved.
1. Press the [ADJ] button.
Blinking
fc LPF (filter frequency of low-pass filter)*
2. Press the [ ] or [ ] button to select
1. Press the [ADJ] button. The previously
adjusted item "CLOCK", for example, is
displayed on the title display, and the mode
changes to the Adjust mode.
"SOUND".
∗ The factory default setting is "fs=96 kHz".
3. Press the [s] button.
4. Press the [ ] or [ ] button to select
SLP LPF (filter slope of low-pass filter)*
fc HPF (filter frequency of high-pass filter)*
SLP HPF (filter slope of high-pass filter)*
G (gain)*
1. Press the [ADJ] button.
"FILTER" or "X-OVER".
2. Press the [ ] or [ ] button to select
2. Press the [ ] or [ ] button to select
"SAMPLING".
∗ Select "FILTER" when the Audio mode is the
Standard mode, and "X-OVER" when the
Audio mode is the Multi mode.
"CLOCK".
3. Press the [ ] or [ ] button to select
3. Press the [s] button. The time at
"fs=96kHz" or "NORMAL" (fs=48kHz).
adjustment (e.g. "PM 2:20") is displayed, and
the mode changes to the Clock setup mode.
5. Press the [ ] or [ ] button to select "
4. Press the [ADJ] button to return to the
FRONT" or "
HIGH".
previous mode.
Blinking
PHASE (phase)*
∗ Select "
the Standard mode, and "
Audio mode is the Multi mode.
FRONT" when the Audio mode is
HIGH" when the
* Sometimes this is not displayed depending on the
selected speaker.
Selecting the audio mode (MODE)
∗ The factory default setting is "STANDARD".
GStandard mode <STANDARD>/Multi mode
<MULTI>
6. Press the [ ] or [ ] button to select the
speaker to adjust.
* The clock is not adjusted if you press any
other button while you are setting the clock.
9. Press the [s] button. The setting value
blinks.
4. Press the [ ] or [ ] button to select hours
or minutes. Items that are blinking can be
adjusted.
∗ The mute function of a selected speaker can
be turned ON/OFF by pressing the [ROTARY]
knob while the speaker is selected.
This is used to make various sound adjustments
for playback. For details, see "About the
Standard mode and Multi mode" (page 18)
10.Press the [ ] or [ ] button to adjust the
setting.
5. Press the [ ] or [ ] button to set the setting
for the item.
∗ For details of the adjustment ranges of each
adjustment item, see "About filter settings"
(page 18).
GDirect mode <DIRECT>
Each press of the buttons switches the setting
as follows:
In the Standard mode:
FRONT
This is used to playback tones as they are
without adjusting the tones of this unit. The
configuration of the speaker system becomes
"front (2ch) + rear (2ch) + non-fader (2ch)."
6. Press the [s] button.
In the Multi mode:
HIGH
11.When you have finished the adjustment,
press the [s] button to return to the
screen in step 8. This sets the setting value.
You will hear a short high-pitched sound, and
the clock will be set.
Note:
12.Repeat steps 8 to 11 to adjust the
• You cannot set the clock when it is displayed with
the power turned OFF.
• Set the clock again if you remove the battery for
inspection or repairs.
FRONT
REAR
MID
adjustment items for the selected speaker.
1. Press the [ADJ] button.
13.When you have finished the adjustment,
press the [ ] button to return to the screen
in step 6.
2. Press the [ ] or [ ] button to select
LOW
SUB-W
"MODE".
3. Press the [ ] or [ ] button to select
7. Press the [ADJ] button to return to the
14.Repeat steps 6 to 13 to adjust the filter of
each speaker.
"STANDARD", "DIRECT" or "MULTI".
SUB-W
previous mode.
4. Press the [ADJ] button to return to the
15.Press the [ADJ] button to return to the
previous mode.
previous mode.
16
DRZ9255
DRZ9255
17
Operations Common to Each Mode
About the Standard mode and Multi
Operations Common to Each Mode
The following figure shows the factory default
settings for filter frequencies in the Multi mode.
About filter frequency (fc)
mode
The filter (high-pass filter and low-pass filter)
frequency can be set for each speaker
These two modes can be used to make the
following various sound adjustments for playing
back music sources:
Frequency band played back mainly
by HIGH (2 kHz onwards)
according to the characteristics of the speaker.
Set the lower limit frequency to be played back
mainly on that speaker on the high-pass filter
(simply called "HPF" from here on), and set the
upper limit frequency on the low-pass filter
(simply called "LPF" from here on).
Frequency band played back mainly
by MID (500 Hz to 2 kHz)
• Setting of the filter (high-pass filter and low-pass
filter) frequency for each speaker
Frequency band played back
mainly by LOW (80 kHz to 500 Hz)
Frequency band played back
• Tone adjustment by P.EQ (parametric equalizer) or
BASS/TREB (bass/treble)
mainly by SUB-W (to 80 kHz)
• Position setting by TIME ALIGN (time alignment)
80Hz
500Hz
2kHz
• Sub-woofer "ST" (stereo), "MONO" (monaural) and
"OFF"
When HPF is set to "2kHz" and LPF is set to
"20kHz"
Frequency band played back
mainly by the speaker
(2kHz to 20kHz)
Select the Standard mode or the Multi mode
according to your speaker configuration.
The filter frequency ranges that can be set vary
according to the speaker. The following table
shows these ranges.
2kHz
20kHz
Frequency set on the low-pass filter
Frequency set on the high-pass filter
• Standard mode:
+ REAR(2ch) +
FRONT(2ch) +
SUB-W(2ch)
FRONT(2ch)
Note, however, that the frequencies are selected
from the value (1/3 octave steps) currently set
on this unit.
When the filter is set to "THROUGH", the setting
for that filter is disabled, and all frequencies are
played back.
• Multi mode:
LOW(2ch) +
HIGH(2ch) +
SUB-W(2ch)
MID(2ch) +
Speaker
HPF (lower limit
frequency)
LPF (upper limit
frequency)
GAbout filter settings
The following filters can be set for each speaker:
• Filter frequency (fc)
When HPF is set to "2kHz" and LPF is set to
"THROUGH"
Standard
FRONT
FRONT
REAR
SUB-W
HIGH
315Hz to 20kHz
(factory default setting: 2kHz)
-
Frequency band played back
mainly by the speaker (2kHz onwards)
-
250Hz to 20kHz, THROUGH
(factory default setting: 2kHz)
2kHz
• Filter slope (SLP)
• Gain (G)
THROUGH, 25Hz to 250Hz
(factory default setting:THROUGH)
-
Frequency set on the high-pass filter
• Phase (PHASE)
THROUGH, 16Hz to 80Hz
(factory default setting:THROUGH)
25Hz to 250Hz, THROUGH
(factory default setting: 80Hz)
When HPF is set to "THROUGH" and LPF is set
to "20kHz"
Notes:
Multi
315Hz to 20kHz
(factory default setting: 2kHz)
-
• Input of a low-band signal to the tweeter may
cause a malfunction.
Frequency band played back
mainly by the speaker (to 20 kHz)
MID
THROUGH, 200Hz to 10kHz
(factory default setting: 500 Hz)
250Hz to 20kHz, THROUGH
(factory default setting: 2kHz)
20kHz
Frequency set on the low-pass filter
LOW
THROUGH, 25Hz to 250Hz
(factory default setting: 80Hz)
250Hz to 10kHz, THROUGH
(factory default setting: 500 Hz)
SUB-W
THROUGH, 16Hz to 80Hz
(factory default setting: THROUGH)
25Hz to 250Hz, THROUGH
(factory default setting: 80Hz)
-: THROUGH (fixed) cannot be changed.
About filter slope (SLP)
GCharacteristics during filter slope
adjustment
Effectiveness can be adjusted for each filter
(HPF or LPF).
"-12dB/oct" is more effective than "-6dB/oct" and
"-18dB/oct" is much more effective.
- 6dB
-6dB
The factory default setting is "-12dB/oct". Try
switching between "-6dB/oct", "-12dB/oct" and "-
18dB/oct " and select the setting that sounds
most natural to you.
- 12dB
-12dB
Gain(G)
- 18dB
-18dB
1oct
Filter Frequency(fc)
18
DRZ9255
DRZ9255
19
Operations Common to Each Mode
Operations Common to Each Mode
In the Standard mode:
FR O N T
In the Multi mode:
HIGH
7. Press the [s] button. The setting value
About gain (G)
Adjusting P.EQ
blinks.
GAbout P.EQ (Parametric Equalizer)
This function allows you to adjust how much the
output level is to be lowered.
8. Press the [ ] or [ ] button to adjust the
setting.
This function allows you to correct in detail all
frequency levels by a smooth curve by correcting
frequencies matched to the type of your car.
∗ This can be adjusted when the Equalizer mode is
set to "P.EQ".
GCharacteristics during gain adjustment
FR O N T
FR O N T
FR O N T
R E A R
HIGH
MID
9. When you have finished the adjustment,
press the [s] button to return to the
screen in step 6. This sets the setting value.
SUB-WOOFER
LOW
MID
HIGH
0dB
-24dB
∗ This can be adjusted when the Audio mode is the
Standard mode or the Multi mode.
10.Repeat steps 6 to 9 to adjust each of the
adjustment items.
About phase (PHASE)
The factory default setting is "NOR" (forward
phase). Try switching between "NOR" (forward
phase) and "REV" (reverse phase) and select
the setting that sounds most natural to you.
11.Press the [ADJ] button to return to the
MID
1. Press the [ADJ] button.
previous mode.
2. Press the [ ] or [ ] button to select
"SOUND".
LOW
3. Press the [s] button.
4. Press the [ ] or [ ] button to select "P.EQ".
5. Press the [ ] button.
R E A R
LOW
Adjusting the position (TIME ALIGN)
GAbout the time alignment function
6. Press the [ ] or [ ] button to select the
adjustment item.
This function allows you to adjust the speakers
so that any listener in the car can obtain the
same sound effect from the speakers.
∗ This item can be adjusted when the Audio mode is
the Standard mode or the Multi mode.
S U B -W
S U B -W
SUB-W
SUB-W
∗ Pressing the [ROTARY] knob while the L/R channel
is selected turns the mute function of the selected
channel ON/OFF.
1. Press the [ADJ] button.
7. Press the [ ] button. The setting value is
displayed.
2. Press the [ ] or [ ] button to select
Each press of the button switches the setting as
follows.
Blinking
"SOUND".
3. Press the [s] button.
P.EQ ON/OFF: ON/OFF
4. Press the [ ] or [ ] button to select "TIME
ALIGN".
8. Press the [s] button. The setting value
5. Press the [ ] or [ ] button to select "
blinks.
P.EQ LEFT/RIGHT: Left channel/Right channel
BAND: band (1 to 5)
FRONT
" or "
HIGH
" when the Audio
HIGH
".
9. Press the [ ] or [ ] button to set the
∗ Select "
mode is the Standard mode, and "
FRONT
distance from the speaker up to the listener.
∗ The adjustment range is 0 cm to 512.4 cm (in
about 0.7 cm steps).
" when the Audio mode is the Multi mode.
∗ The range can be adjusted in about 7 cm
steps by holding down the [ ] or [ ] buttons.
6. Press the [ ] or [ ] button to select the
speaker to adjust.
fo: frequency (BAND 1,2,3 : 50 Hz to 20 kHz)
(BAND 4,5 : 630 Hz to 20 kHz)
∗ For details, see "Appendix : Time Alignment
List" (page 32).
G: gain (-12 dB to +12 dB)
Q: Q-curve (0.5 to 12.0)
C: copy
10.When you have finished the adjustment,
press the [s] button to return to the
screen in step 7. This sets the setting value.
* The mute function of a selected speaker can
be turned ON/OFF by pressing the [ROTARY]
knob while the speaker is selected.
11.Press the [ ] button to return to the screen
in step 6.
Each press of the button switches the setting as
follows.
12.Repeat steps 6 to 11 to adjust the position of
each speaker.
13.Press the [ADJ] button to return to the
previous mode.
20
DRZ9255
DRZ9255
21
Operations Common to Each Mode
Operations Common to Each Mode
Selecting the equalizer mode
(EQ SELECT)
This item can be selected when the Audio mode
is the Standard mode or the Multi mode.
GAbout P.EQ adjustment
About correction of frequency
characteristics
Saving the filter setting/time
alignment setting/P.EQ setting
(MEMORY)
Three groups of adjustment settings made to
suit your car can be saved for both the Standard
mode and Multi mode.
∗ P.EQ settings are not saved when the Equalizer
mode is set to "BASS/TREB".
The P.EQ menu contains the following
adjustment items.
• Selection of channel (LEFT/RIGHT)
The following figure shows the relationship
between center frequency, gain and Q-curve.
Select the channel (left or right) to be adjusted.
The factory default setting is "P.EQ".
• Selection of band (BAND)
Select the frequency band (1 to 5) to be adjusted.
Q-curve (Q)
Level
GParametric equalizer mode <P.EQ>
F
f
• Selection of center frequency (fo)
Select the frequency to be taken as the center
frequency in frequency correction.
(dB)
Q =
The sound field can be adjusted by the P.EQ of
five bands. For details on P.EQ adjustment, see
"Adjusting P.EQ" (page 21).
1. Press the [ADJ] button.
3dB
Bands 1 to 3: Select from the range 50 Hz to
20 kHz (1/3 octave steps, 27 points)
Gain (G)
2. Press the [ ] or [ ] button to select
GBass/treble mode <BASS/TREB>
f
Bands 4 and 5: Select from the range 630 Hz
to 20 kHz (1/3 octave steps, 16 points)
"SOUND".
The sound field can be adjusted by bass/treble.
For details on bass/treble adjustment, see
"Adjusting the bass/treble" (page 12).
3. Press the [s] button.
4. Press the [ ] or [ ] button to select
• Gain adjustment (GAIN)
Gain (output level) can be adjusted within the
range -12 dB to +12 dB.
Frequency
curve
"MEMORY".
(0.5 dB steps, 49 points)
5. Press the [ ] button.
1. Press the [ADJ] button.
• Selection of Q-curve (Q)
Select the sharpness of the Q-curve within the
range 0.5 to 12.0.
About Q-curve
2. Press the [ ] or [ ] button to select "EQ
SELECT".
6. Press the [ ] or [ ] button to select
"MEMORY1", "MEMORY2", "MEMORY3" or
"DEFAULT".
The following figure and the table show the
relationship between center frequency, gain and
Q-curve.
(0.5 steps, 24 points)
3. Press the [ ] or [ ] button to select "P.EQ"
or "BASS/TREB".
∗ The factory default setting is "DEFAULT". This
setting can be called up but cannot be
changed to other settings.
• Copying adjustment values (COPY)
Select whether or not to copy the channel settings
currently being adjusted to another channel.
When you press the [s] button, the copy
confirmation screen is displayed.
When a large numerical value is set, the Q-
curve becomes sharper, and when a small
numerical value is set, the Q-curve becomes
gentler.
4. Press the [ADJ] button to return to the
previous mode.
7. Hold down the [s] button for about 1
second. "SAVE?" is displayed.
Blinking
Setting the sub-woofer/non-fader
8. Hold down the [s] button for about 1
second. You will hear a short high-pitched
sound, and the filter settings, time alignment
settings and P.EQ settings are saved to the
memory (1 to 3) selected in step 6.
Flat frequency characteristics can be made by
selecting a Q-curve inverted to the frequency
curve to be corrected.
(SUB-WOOFER/NON-FADER)
Set to "ST" (stereo) or "MONO" (monaural)
when a sub-woofer/non-fader is connected.
There is no output when "OFF" is set.
* L: shows the channel being adjusted while R:
shows un-adjusted channels.
9. Press the [ADJ] button to return to the
* The factory default setting is "ST".
Holding down the [s] button for about 1
second copies the settings, and returns to the
previous screen.
To return to the previous screen without
copying the settings, press the [s] button.
previous mode.
1. Press the [ADJ] button.
GTo call up saved settings
2. Press the [ ] or [ ] button to select "SUB-
WOOFER" or "NON-FADER".
At step 7, press the [s] button, and hold
down the [s] button for about 1 second when
"LOAD?" is displayed.
Q-curve
12
Q-curve
0.5
∗ Select "SUB-WOOFER" when the Audio
mode is the Standard mode or the Multi mode,
and "NON-FADER" when the Audio mode is
Direct mode.
GAbout correction
You will hear a short high-pitched sound, and
the settings are called up. Press the [ADJ]
button to return to the previous mode.
∗ When the Equalizer mode is set to "BASS/TREB",
the P.EQ settings that are called up are reflected
when the Equalizer mode setting is changed to
"P.EQ".
When the frequency characteristics are
measured by a measuring device, they do not
need to be corrected if the frequency
characteristics are flat (no ridges or valleys in
the frequency waveform). However, frequency
characteristics sometimes partially rise up or fall
down. If this happens, create a frequency curve
of inverse characteristics matched to the center
frequency of the ridges or valleys in the
fo: Center frequency, G: gain (output level),
Q: Q-curve
3. Press the [ ] or [ ] button to select "ST"
(stereo), "MONO" (monaural) or "OFF".
Parametric equalizer parameters
4. Press the [ADJ] button to return to the
BAND
Left channel
Right channel
previous mode.
fo
G
Q
1
1
1
1
1
fo
50Hz*1
G
Q
1
1
1
1
1
BAND1
BAND2
BAND3
BAND4
BAND5
50Hz*1
0dB
0dB
160Hz*1 0dB
500Hz*1 0dB
160Hz*1 0dB
500Hz*1 0dB
GAbout settings after a reset
frequency waveform. This corrects the frequency
characteristics so that they are flat.
When the [RESET] button is pressed to reset
this unit, all settings set here disappear. Make a
note of the settings in the Sound Setup Memo
(page 34) to make these settings again after a
reset.
2kHz*2
8kHz*2
0dB
0dB
2kHz*2
8kHz*2
0dB
0dB
"Correction" is the process or making frequency
characteristics as flat as possible.
*1 Select from range 50 Hz to 20 kHz
*2 Select from range 630 Hz to 20 kHz
22
DRZ9255
DRZ9255
23
Operations Common to Each Mode
Setting the input level for portable
audio (AUX SENS)
This unit is provided with two AUX input lines.
The input level for third-party portable audio
connected to each of these lines can be set.
7. OPERATIONS OF ACCESSORIES
CD Changer Operations
Setting the anti-theft indicator
(BLINK LED)
This function makes the indicator of Pch6 blink
(red) when ACC is OFF to create a visual anti-
theft effect.
CD changer functions
Displaying CD titles
When an optional CD changer is connected
through the CeNET cable, this unit controls all
CD changer functions. This unit can control a
total of 2 changers.
This unit can display title data for CD-text CDs
and user titles input with this unit.
* The factory default setting is "MID".
* The factory default setting is "OFF".
∗ Title data for CD-text CDs can be displayed with
this unit only when it is connected to CDC655Tz.
1. Press the [ADJ] button.
1. Press the [ADJ] button.
2. Press the [ ] or [ ] button to select "AUX
SENS".
2. Press the [ ] or [ ] button to select
Press the [FUNC] button and select the CD
changer mode to start play. If 2 CD changers
are connected, press the [FUNC] button to
select the CD changer for play.
∗ If “NO MAG” appears in the display, insert the
magazine into the CD changer. “DISC CHK” appears
in the display while the player loads (checks) the
magazine.
GWhen connected to DCZ625 or CDC1255z.
Press the [DISP] button to display the title.
GWhen connected to CDC655Tz
"BLINK-LED".
3. Press the [s] button.
4. Press the [ ] or [ ] button to select the input
line.
3. Press the [ ] or [ ] button to select "ON" or
"OFF".
1. Press the [DISP] button to display the title.
4. Press the [ADJ] button to return to the
2. Each time you press and hold the [DISP]
button for 1 second or longer, the title display
changes in the following order:
previous mode.
∗ If “NO DISC” appears in the display, eject the
magazine and insert discs into each slot. Then,
reinsert the magazine back into the CD changer.
Setting the beep tone during button
CD-text title (disc) ➜ Artist name ➜ CD-text title
(track) …
Notes:
• If the CD playing is not a CD-text CD or no user
title has been input, “NO TITLE” appears in the
display.
• If a CD-text CD is not input its disc title or a track
title, “NO TITLE” appears in the display.
Each press of the button switches the line as
follows:
operation (BEEP)
A high-pitched beep tone is emitted when you
operate a button. This beep output can be
disabled.
Note:
AUX1 SENS: Input line 1
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
* The factory default setting is "ON".
AUX2 SENS: Input line 2
1. Press the [ADJ] button.
CAUTION
CD-ROM discs cannot be played from every
CD changer, it depends on the model.
5
Press the [ ] button.
2. Press the [ ] or [ ] button to select
6. Press the [ ] or [ ] button to select "HIGH",
"MID" or "LOW".
Procedure to scroll a title
1. Press and hold the [ADJ] button for 1 second
or longer.
"BEEP".
3. Press the [ ] or [ ] button to select "ON" or
"OFF".
7. When you select this, press the [ ] button
to return to the screen in step 4.
2. The title is scrolled.
Pausing play
1. Press the [s] button to pause play.
“PAUSE” appears in the display.
4. Press the [ADJ] button to return to the
8. Repeat steps 4 to 7 to set the input level of
each input line.
previous mode.
Selecting a CD
1. Press the [UP] or [DOWN] button to select
the desired disc.
9. Press the [ADJ] button to return to the
2. To resume play, press the [s] button again.
previous mode.
∗ If a CD is not loaded in a slot of magazine,
pressing the [UP] or [DOWN] buton can not
work.
Setting the digital output (D-OUT)
Set digital output ON when the digital output
connector is used as the digital output
connector of the built-in CD. There is no output
when "OFF" is set.
∗ This item cannot be set when a CD changer is
connected via the CeNET cable.
* The factory default setting is "OFF".
1. Press the [ADJ] button.
2. Press the [ ] or [ ] button to select "D-
OUT".
3. Press the [ ] or [ ] button to select "ON" or
"OFF".
4. Press the [ADJ] button to return to the
previous mode.
24
DRZ9255
DRZ9255
25
CD Changer Operations
TV Operations
Selecting a track
TV tuner functions
Manual tuning
Repeat play
GTrack-up
When an optional TV tuner is connected through
the CeNET cable, this unit controls all TV tuner
functions. To watch a TV, a TV tuner and a
monitor are required.
There are 2 ways available: Quick tuning and
step tuning.
Repeat play continuously plays the current track.
This function continues automatically until it is
cancelled.
1. Press the [D] button to move ahead to the
beginning of the next track.
When you are in the step tuning mode, the
frequency changes one step at a time. In the
quick tuning mode, you can quickly tune the
desired frequency.
1. Press the [RPT] button. “RPT” lights in the
2. Each time you press the [D] button, the
track advances ahead to the beginning of the
next track.
display and the current track is repeated.
2. To cancel repeat play, press the [RPT] button
again. “RPT” goes off from the display and
normal play resumes.
Watching a TV
1. Press the [FUNC] button and select the TV
1. Press the [BAND] button and select the
GTrack-down
desired band (TV1 or TV2).
mode.
1. Press the [A] button to move back to the
∗ If “MANU” is not lit in the display, press and
hold the [BAND] button for 1 second or longer.
“MANU” lights in the display and manual
tuning is now available.
beginning of the current track.
2. Press the [BAND] button to select the
desired TV band (TV1 or TV2). Each time the
button is pressed, the input selection toggles
between TV1 and TV2.
Disc repeat play
2. Press the [A] button twice to move to the
After all the tracks on the current disc have been
played, disc repeat play automatically replays
the current disc over from the first track. This
function continues automatically until it is
cancelled.
beginning of the previous track.
2. Tune in a station.
3. Press the [A] or [D] button to tune in the
Fast-forward/fast-backward
GFast-forward
GQuick tuning:
desired TV station.
Press and hold the [A] or [D] button for 1
Press and hold the [D] button for 1 second or
second or longer to tune in a station.
1. Press and hold the [RPT] button for 1 second
or longer. “DISC” and “RPT” light in the
display and disc repeat play starts.
Watching a video
longer.
GStep tuning:
The TV tuner has a VTR input terminal to which
1 external device can be connected. Connect a
12 V video cassette player (VCP) or video
cassette recorder (VCR) to the TV tuner input
terminal.
GFast-backward
Press the [A] or [D] button to manually
Press and hold the [A] button for 1 second or
2. To cancel disc repeat play, press the [RPT]
button again. “DISC” and “RPT” go off from
the display and normal play resumes on the
current track.
tune in a station.
longer.
Recalling a preset station
A total of 12 TV stations can be stored (6-TV1
and 6-TV2). This allows you to select your
favorite TV stations and store them in memory
for later recall.
Scan play
Scan play locates and plays the first 10 seconds
of each track on a disc automatically. This
function continues on the disc until it is cancelled.
∗ The scan play is useful when you want to select a
desired track.
1. Press the [s] button to select VTR.
2. To return to the TV broadcast, press the
Random play
Random play selects and plays individual tracks
on the disc in no particular order. This function
continues automatically until it is cancelled.
[s] button.
1. Press the [BAND] button and select the
Tuning
desired TV band (TV1 or TV2).
There are 3 types of tuning mode available,
Seek tuning, manual tuning and preset tuning.
1. Press the [SCN] button to start track
scanning. “SCN” lights in the display.
1. Press the [RDM] button. “RDM” lights in the
2. To recall a stored TV station, press the
desired [DIRECT] button to select that
station.
display and random play begins.
2. To cancel the scan play, press the [SCN]
button again. “SCN” goes off from the display
and the current track continues to play.
2. To cancel random play, press the [RDM]
button again. “RDM” goes off from the display
and normal play resumes.
Seek tuning
1. Press the [BAND] button and select the
desired TV band (TV1 or TV2).
∗ Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
station into preset memory.
Disc scan play
Disc random play
∗ If “MANU” is lit in the display, press and hold
the [BAND] button for 1 second or longer.
“MANU” in the display goes off and seek
tuning is now available.
Disc scan play locates and plays the first 10
seconds of the first track on each disc in the
currently selected CD changer. This function
continues automatically until it is cancelled.
The disc random play selects and plays
individual tracks or discs automatically in no
particular order. This function continues
automatically until it is cancelled.
Manual memory
1. Select the desired station with seek tuning,
manual tuning or preset tuning.
2. Press the [A] or [D] button to
2. Press and hold one of [DIRECT] buttons for
2 seconds or longer to store the current
station into preset memory.
automatically seek a station. Press the [D]
button to automatically tune up the frequency
band to the next available TV station; press
the [A] button to automatically tune down.
∗ Disc scan play is useful when you want to select a
desired CD.
1. Press and hold the [RDM] button for 1
second or longer. “DISC” and “RDM” light in
the display and disc random play starts.
1. Press and hold the [SCN] button for 1
second or longer. “DISC” and “SCN” light in
the display and disc scan play starts.
2. To cancel disc random play, press the [RDM]
button again. “DISC” and “RDM” go off from
the display and normal play resumes from
the current track.
2. To cancel disc scan play, press the [SCN]
button again. “DISC” and “SCN” go off from
the display and the current track continues to
play.
26
DRZ9255
DRZ9255
27
TV Operations
8. IN CASE OF DIFFICULTY
Auto store
Auto store selects 6 TV stations automatically
and stores each one into preset memory.
Problem
Cause
Fuse is blown.
Measure
If there are not 6 stations with good reception,
stations previously stored in memory remain
and only the strong stations are stored into
memory.
Power does not turn
on.
(No sound is pro-
duced.)
Replace with a fuse of the same amperage. If
the fuse blows again, consult your store of
purchase.
Incorrect wiring.
Consult your store of purchase.
1. Press the [BAND] button and select the
desired TV band (TV1 or TV2).
No sound output
Power antenna lead is short- 1. Turn the unit off.
ed to ground or excessive
2. Remove all wires attached to the power
2. Press and hold the [P/A] button for 2
seconds or longer. The stations with good
reception are stored automatically to the
preset channels.
when operating the
unit with amplifiers or current is required for re-
power antenna attach- mote controlling on the am-
ed.
antenna lead. Check each wire for a possible
short to ground using an ohm meter.
3. Turn the unit back on.
plifiers or power antenna.
4. Reconnect each amplifier remote wire to the
power antenna lead one by one. If the
amplifiers turn off before all wires are
attached, use an external relay to provide
remote-on voltage (excessive current
required).
Preset scan
Preset scan allows the user to view each preset
position before it automatically advances to the
next preset. This function is useful for searching
for a desired TV station in memory.
Nothing happens
when buttons are
pressed.
The microprocessor has
Press the reset button for
malfunctioned due to noise, about 2 seconds with a
etc.
thin rod.
1. Press the [P/A] button.
2. When the desired station is found, press the
[P/A] button again to remain tuned to that
station.
Display is not accu-
rate.
Note:
• Do not press and hold the [P/A] button for 2
seconds or longer. Doing so will trigger the auto
store function and start storing stations into
memory.
Reset button
Compact disc cannot Another compact disc is al- Eject the compact disc before loading the new
be loaded.
ready loaded.
one.
Sound skips or is
noisy.
Compact disc is dirty.
Clean the compact disc with a soft cloth.
Setting the TV diversity (TV DIVER)
This function automatically switches to reception
by a good-reception antenna during reception of
TV broadcasts (when a TV tuner is connected).
Compact disc is heavily
scratched or warped.
Replace with a compact disc with no scratches.
* The factory default setting is "ON". Set again to
"OFF" when the TV diversity antenna is not in use.
Sound is bad directly Water droplets may form on Let dry for about 1 hour with the power on.
after power is turned the internal lens when the
on.
car is parked in a humid
place.
1. Press the [ADJ] button.
The CD is automati-
cally ejected.
A CD is loaded upside-
down inside the CD deck
and does not play.
Eject the disc then reload it properly.
2. Press the [ ] or [ ] button to select "TV
DIVER".
3. Press the [ ] or [ ] button to select "ON" or
"OFF".
4. Press the [ADJ] button to return to the
previous mode.
28
DRZ9255
DRZ9255
29
Usable Discs:
Compact disc
Each fc1/3 oct step GAIN 12 dB Q0.5 to 12
: Time alignment/0 to 512.4 cm 0.7 cm steps
9. ERROR DISPLAYS
Frequency Response ( 1 dB):
5 Hz to 20 kHz
: Tone control/BASS 50 Hz 12 dB
TREBLE 10 kHz 12 dB
If an error occurs, one of the following displays is displayed.
Take the measures described below to eliminate the problem.
Signal to Noise Ratio (1 kHz):
112 dB
* When BASS/TREB is selected
STANDARD mode: FRONT-2WAY
Dynamic Range (1 kHz):
100 dB
Error Display
ERROR 2
Cause
Measure
HIGH-HPF 315 Hz to 20 kHz/
FRONT-LPF 250 Hz to 20 kHz, THROUGH/
REAR-HPF THROUGH, 25 Hz to 250 Hz/
SUB-W-LPF 25 Hz to 250 Hz, THROUGH/
SUB-W-HPF THROUGH, 16 Hz to 80 Hz
A CD is caught inside the CD deck and is
not ejected.
This is a failure of CD deck’s mechanism.
Consult your store of purchase.
Harmonic Distortion:
0.003% (20Hz to 20kHz)
ERROR 3
ERROR 2
ERROR 3
ERROR 6
ERROR 2
ERROR 3
ERROR 6
A CD cannot be played due to scratches,
etc.
Replace with a non-scratched,
non-warped-disc.
Audio
Bass Control Action (50 Hz):
12 dB
Each fc1/3 oct step SLOPE -6/-12/-18 dB
GAIN 0 to -24 dB
5BAND-P.EQ/time alignment/tone control
A CD inside the CD changer is not loaded.
This is a failure of CD changer’s mechanism.
Consult your store of purchase.
Treble Control Action (10 kHz):
12 dB
DIRECT mode: FRONT+REAR+NON-FADER
A CD inside the CD changer cannot be
played due to scratches, etc.
Replace with a non-scratched, non-warped
disc.
Line Output Level (CD 1 kHz):
Vol 0dB = 4V
Vol +6dB = 8V (Max)
General
Power Supply Voltage:
14.4 V DC (10.8 to 15.6 V allowable),
negative ground
A CD inside the CD changer cannot be
played because it is loaded upside-down.
Eject the disc then reload it properly.
DSP/DAC
• A/D conversion: 24-bit 64x oversampling ∆Σ
A/D converter
Current Consumption:
Less than 5 A
A DISC inside the DVD changer cannot be
played.
This is a failure of DVD mechanism.
Consult your store of purchase.
Weight / Source unit:
3.96 lb. (1.8 kg)
A DISC cannot be played due to scratches,
etc.
Retry or replace with a non-scratched, non-
warped-disc.
• D/A conversion: 96 kHz/24-bit advanced
segment D/A converter
Weight / DC-DC Converter:
1.541 lb. (700 g)
A DISC inside the DVD changer cannot be
played because it is loaded upside-down.
Eject the disc then reload it properly
Set the correct Parental level.
• 8x oversampling digital filter:
Blocked band attenuation: -130 dB
Transmitted band attenuation: 0.00001 dB
Weight / Remote control unit:
1.76 oz. (50 g) (including battery)
ERROR P
ERROR R
Parental level error
Region code error
• Sampling rate converter:
Input sampling rate (fs32k, fs44.1k, fs48k,
fs96k)
Dimensions / Source unit:
7" (Width) ✕ 2" (Height) ✕ 6-1/8" (Depth)
[178 (W) ✕ 50 (H) ✕ 155 (D) mm]
Eject the disc and replace correct region
code disc.
Output sampling rate (fs48k, fs96k)
Dimensions / DC-DC Converter:
If an error display other than the ones described above appears, press the reset button. If the problem
persists, turn off the power and consult your store of purchase.
• DSP: 24-bit audio DSP, 34-bit arithmetic
operation (overflow margin 4-bit)
MULTI mode: 4WAY. X-OVER/
6-7/10" (Width) ✕ 1-5/8" (Height) ✕ 3-7/8" (Depth)
[163 (W) ✕ 42 (H) ✕ 98 (D) mm]
Dimensions / Remote control unit:
1-3/4" (Width) ✕ 4-5/16" (Height) ✕ 1-1/8" (Depth)
[52 (W) ✕ 125 (H) ✕ 12 (D) mm]
HIGH-HPF 315 Hz to 20 kHz/
MID-LPF 250 Hz to 20 kHz, THROUGH/
MID-HPF THROUGH, 200 Hz to 20 kHz/
LOW-LPF 250 Hz to 10 kHz, THROUGH/
LOW-HPF THROUGH, 25 Hz to 250 Hz/
SUB-W-LPF 25 Hz to 250 Hz, THROUGH/
SUB-W-HPF THROUGH, 16 Hz to 80 Hz
10. SPECIFICATIONS
Frequency Response ( 3 dB):
30 Hz to 15 kHz
FM Tuner
Frequency Range:
87.9 MHz to 107.9 MHz
Each fc1/3 oct step SLOPE -6/-12/-18 dB
GAIN 0 to -24 dB
AM Tuner
Frequency Range:
530 kHz to 1710 kHz
Usable Sensitivity:
9 dBf
: 5BAND-P.EQ/BAND 1/2/3 50 Hz to 20 kHz
BAND4/5 630 Hz to 20 kHz
50dB Quieting Sensitivity:
15 dBf
Usable Sensitivity:
25 µV
Alternate Channel Selectivity:
70 dB
CD Player
System:
Compact disc digital audio system
Stereo Separation (1 kHz):
35 dB
Note:
• Specifications and design are subject to change without notice for further improvement.
30
DRZ9255
DRZ9255
31
STEP Distance Time
STEP Distance Time
STEP Distance Time
[cm] [msec]
STEP Distance Time
[cm] [msec]
STEP Distance Time
[cm] [msec]
[cm]
[msec]
[cm]
[msec]
APPENDIX : TIME ALIGNMENT LIST
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
236.2
236.9
237.6
238.3
239.0
239.7
240.5
241.2
241.9
242.6
243.3
244.0
244.7
245.5
246.2
246.9
247.6
248.3
249.0
249.8
250.5
251.2
251.9
252.6
253.3
254.0
254.8
255.5
256.2
256.9
257.6
258.3
259.1
259.8
260.5
261.2
261.9
262.6
263.4
264.1
264.8
265.5
266.2
266.9
267.6
268.4
269.1
269.8
270.5
271.2
271.9
272.7
273.4
274.1
274.8
275.5
276.2
276.9
277.7
278.4
279.1
279.8
280.5
281.2
282.0
282.7
283.4
284.1
284.8
285.5
286.3
287.0
287.7
288.4
289.1
289.8
290.5
291.3
292.0
292.7
6.88
6.90
6.92
6.94
6.96
6.98
7.00
7.02
7.04
7.06
7.08
7.10
7.13
7.15
7.17
7.19
7.21
7.23
7.25
7.27
7.29
7.31
7.33
7.35
7.38
7.40
7.42
7.44
7.46
7.48
7.50
7.52
7.54
7.56
7.58
7.60
7.63
7.65
7.67
7.69
7.71
7.73
7.75
7.77
7.79
7.81
7.83
7.85
7.88
7.90
7.92
7.94
7.96
7.98
8.00
8.02
8.04
8.06
8.08
8.10
8.13
8.15
8.17
8.19
8.21
8.23
8.25
8.27
8.29
8.31
8.33
8.35
8.38
8.40
8.42
8.44
8.46
8.48
8.50
8.52
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
293.4
294.1
294.8
295.6
296.3
297.0
297.7
298.4
299.1
299.8
300.6
301.3
302.0
302.7
303.4
304.1
304.9
305.6
306.3
307.0
307.7
308.4
309.2
309.9
310.6
311.3
312.0
312.7
313.4
314.2
314.9
315.6
316.3
317.0
317.7
318.5
319.2
319.9
320.6
321.3
322.0
322.7
323.5
324.2
324.9
325.6
326.3
327.0
327.8
328.5
329.2
329.9
330.6
331.3
332.1
332.8
333.5
334.2
334.9
335.6
336.3
337.1
337.8
338.5
339.2
339.9
340.6
341.4
342.1
342.8
8.54
8.56
8.58
8.60
8.63
8.65
8.67
8.69
8.71
8.73
8.75
8.77
8.79
8.81
8.83
8.85
8.88
8.90
8.92
8.94
8.96
8.98
9.00
9.02
9.04
9.06
9.08
9.10
9.13
9.15
9.17
9.19
9.21
9.23
9.25
9.27
9.29
9.31
9.33
9.35
9.38
9.40
9.42
9.44
9.46
9.48
9.50
9.52
9.54
9.56
9.58
9.60
9.63
9.65
9.67
9.69
9.71
9.73
9.75
9.77
9.79
9.81
9.83
9.85
9.88
9.90
9.92
9.94
9.96
9.98
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
350.7 10.21
351.4 10.23
352.1 10.25
352.8 10.27
353.5 10.29
354.2 10.31
355.0 10.33
355.7 10.35
356.4 10.38
357.1 10.40
357.8 10.42
358.5 10.44
359.2 10.46
360.0 10.48
360.7 10.50
361.4 10.52
362.1 10.54
362.8 10.56
363.5 10.58
364.3 10.60
365.0 10.63
365.7 10.65
366.4 10.67
367.1 10.69
367.8 10.71
368.5 10.73
369.3 10.75
370.0 10.77
370.7 10.79
371.4 10.81
372.1 10.83
372.8 10.85
373.6 10.88
374.3 10.90
375.0 10.92
375.7 10.94
376.4 10.96
377.1 10.98
377.9 11.00
378.6 11.02
379.3 11.04
380.0 11.06
380.7 11.08
381.4 11.10
382.1 11.13
382.9 11.15
383.6 11.17
384.3 11.19
385.0 11.21
385.7 11.23
386.4 11.25
387.2 11.27
387.9 11.29
388.6 11.31
389.3 11.33
390.0 11.35
390.7 11.38
391.4 11.40
392.2 11.42
392.9 11.44
393.6 11.46
394.3 11.48
395.0 11.50
395.7 11.52
396.5 11.54
397.2 11.56
397.9 11.58
398.6 11.60
399.3 11.63
400.0 11.65
400.8 11.67
401.5 11.69
402.2 11.71
402.9 11.73
403.6 11.75
404.3 11.77
405.0 11.79
405.8 11.81
406.5 11.83
407.2 11.85
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
407.9 11.88
408.6 11.90
409.3 11.92
410.1 11.94
410.8 11.96
411.5 11.98
412.2 12.00
412.9 12.02
413.6 12.04
414.3 12.06
415.1 12.08
415.8 12.10
416.5 12.13
417.2 12.15
417.9 12.17
418.6 12.19
419.4 12.21
420.1 12.23
420.8 12.25
421.5 12.27
422.2 12.29
422.9 12.31
423.7 12.33
424.4 12.35
425.1 12.38
425.8 12.40
426.5 12.42
427.2 12.44
427.9 12.46
428.7 12.48
429.4 12.50
430.1 12.52
430.8 12.54
431.5 12.56
432.2 12.58
433.0 12.60
433.7 12.63
434.4 12.65
435.1 12.67
435.8 12.69
436.5 12.71
437.2 12.73
438.0 12.75
438.7 12.77
439.4 12.79
440.1 12.81
440.8 12.83
441.5 12.85
442.3 12.88
443.0 12.90
443.7 12.92
444.4 12.94
445.1 12.96
445.8 12.98
446.6 13.00
447.3 13.02
448.0 13.04
448.7 13.06
449.4 13.08
450.1 13.10
450.8 13.13
451.6 13.15
452.3 13.17
453.0 13.19
453.7 13.21
454.4 13.23
455.1 13.25
455.9 13.27
456.6 13.29
457.3 13.31
458.0 13.33
458.7 13.35
459.4 13.38
460.1 13.40
460.9 13.42
461.6 13.44
462.3 13.46
463.0 13.48
463.7 13.50
464.4 13.52
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
465.2 13.54
465.9 13.56
466.6 13.58
467.3 13.60
468.0 13.63
468.7 13.65
469.5 13.67
470.2 13.69
470.9 13.71
471.6 13.73
472.3 13.75
473.0 13.77
473.7 13.79
474.5 13.81
475.2 13.83
475.9 13.85
476.6 13.88
477.3 13.90
478.0 13.92
478.8 13.94
479.5 13.96
480.2 13.98
480.9 14.00
481.6 14.02
482.3 14.04
483.0 14.06
483.8 14.08
484.5 14.10
485.2 14.13
485.9 14.15
486.6 14.17
487.3 14.19
488.1 14.21
488.8 14.23
489.5 14.25
490.2 14.27
490.9 14.29
491.6 14.31
492.4 14.33
493.1 14.35
493.8 14.38
494.5 14.40
495.2 14.42
495.9 14.44
496.6 14.46
497.4 14.48
498.1 14.50
498.8 14.52
499.5 14.54
500.2 14.56
500.9 14.58
501.7 14.60
502.4 14.63
503.1 14.65
503.8 14.67
504.5 14.69
505.2 14.71
505.9 14.73
506.7 14.75
507.4 14.77
508.1 14.79
508.8 14.81
509.5 14.83
510.2 14.85
511.0 14.88
511.7 14.90
512.4 14.92
The list below shows values obtained by calculating the 1STEP delay with 1STEP distance set to
0.715625cm and rounding the resulting figures to the nearest whole number.
1STEP delay : 0.020833333[msec]
Velocity of sound v=331.5+0.6∗T
1STEP distance=0.715625[cm]
T=20°C v =343.5[m/s] 1cm=0.029112082[msec]
STEP Distance Time
STEP Distance Time
STEP Distance Time
[cm] [msec]
STEP Distance Time
STEP Distance Time
[cm]
[msec]
[cm]
[msec]
[cm]
[msec]
[cm]
[msec]
0
0.0
0.00
0.02
0.04
0.06
0.08
0.10
0.13
0.15
0.17
0.19
0.21
0.23
0.25
0.27
0.29
0.31
0.33
0.35
0.38
0.40
0.42
0.44
0.46
0.48
0.50
0.52
0.54
0.56
0.58
0.60
0.63
0.65
0.67
0.69
0.71
0.73
0.75
0.77
0.79
0.81
0.83
0.85
0.88
0.90
0.92
0.94
0.96
0.98
1.00
1.02
1.04
1.06
1.08
1.10
1.13
1.15
1.17
1.19
1.21
1.23
1.25
1.27
1.29
1.31
1.33
1.35
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
47.2
47.9
48.7
49.4
50.1
50.8
51.5
52.2
53.0
53.7
54.4
55.1
55.8
56.5
57.3
58.0
58.7
59.4
60.1
60.8
61.5
62.3
63.0
63.7
64.4
65.1
65.8
66.6
67.3
68.0
68.7
69.4
70.1
70.8
71.6
72.3
73.0
73.7
74.4
75.1
75.9
76.6
77.3
78.0
78.7
79.4
80.2
80.9
81.6
82.3
83.0
83.7
84.4
85.2
85.9
86.6
87.3
88.0
88.7
89.5
90.2
90.9
91.6
92.3
93.0
93.7
1.38
1.40
1.42
1.44
1.46
1.48
1.50
1.52
1.54
1.56
1.58
1.60
1.63
1.65
1.67
1.69
1.71
1.73
1.75
1.77
1.79
1.81
1.83
1.85
1.88
1.90
1.92
1.94
1.96
1.98
2.00
2.02
2.04
2.06
2.08
2.10
2.13
2.15
2.17
2.19
2.21
2.23
2.25
2.27
2.29
2.31
2.33
2.35
2.38
2.40
2.42
2.44
2.46
2.48
2.50
2.52
2.54
2.56
2.58
2.60
2.63
2.65
2.67
2.69
2.71
2.73
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
94.5 2.75
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
141.7
142.4
143.1
143.8
144.6
145.3
146.0
146.7
147.4
148.1
148.9
149.6
150.3
151.0
151.7
152.4
153.1
153.9
154.6
155.3
156.0
156.7
157.4
158.2
158.9
159.6
160.3
161.0
161.7
162.4
163.2
163.9
164.6
165.3
166.0
166.7
167.5
168.2
168.9
169.6
170.3
171.0
171.8
172.5
173.2
173.9
174.6
175.3
176.0
176.8
177.5
178.2
178.9
179.6
180.3
181.1
181.8
182.5
183.2
183.9
184.6
185.3
186.1
186.8
187.5
188.2
4.13
4.15
4.17
4.19
4.21
4.23
4.25
4.27
4.29
4.31
4.33
4.35
4.38
4.40
4.42
4.44
4.46
4.48
4.50
4.52
4.54
4.56
4.58
4.60
4.63
4.65
4.67
4.69
4.71
4.73
4.75
4.77
4.79
4.81
4.83
4.85
4.88
4.90
4.92
4.94
4.96
4.98
5.00
5.02
5.04
5.06
5.08
5.10
5.13
5.15
5.17
5.19
5.21
5.23
5.25
5.27
5.29
5.31
5.33
5.35
5.38
5.40
5.42
5.44
5.46
5.48
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
188.9
189.6
190.4
191.1
191.8
192.5
193.2
193.9
194.7
195.4
196.1
196.8
197.5
198.2
198.9
199.7
200.4
201.1
201.8
202.5
203.2
204.0
204.7
205.4
206.1
206.8
207.5
208.2
209.0
209.7
210.4
211.1
211.8
212.5
213.3
214.0
214.7
215.4
216.1
216.8
217.6
218.3
219.0
219.7
220.4
221.1
221.8
222.6
223.3
224.0
224.7
225.4
226.1
226.9
227.6
228.3
229.0
229.7
230.4
231.1
231.9
232.6
233.3
234.0
234.7
235.4
5.50
5.52
5.54
5.56
5.58
5.60
5.63
5.65
5.67
5.69
5.71
5.73
5.75
5.77
5.79
5.81
5.83
5.85
5.88
5.90
5.92
5.94
5.96
5.98
6.00
6.02
6.04
6.06
6.08
6.10
6.13
6.15
6.17
6.19
6.21
6.23
6.25
6.27
6.29
6.31
6.33
6.35
6.38
6.40
6.42
6.44
6.46
6.48
6.50
6.52
6.54
6.56
6.58
6.60
6.63
6.65
6.67
6.69
6.71
6.73
6.75
6.77
6.79
6.81
6.83
6.85
1
0.7
95.2
95.9
2.77
2.79
2.81
2.83
2.85
2.88
2.90
2.92
2.94
2.96
2.98
3.00
3.02
3.04
3.06
3.08
3.10
3.13
3.15
3.17
3.19
3.21
3.23
3.25
3.27
3.29
3.31
3.33
3.35
3.38
3.40
3.42
3.44
3.46
3.48
3.50
3.52
3.54
3.56
3.58
3.60
3.63
3.65
3.67
3.69
3.71
3.73
3.75
3.77
3.79
3.81
3.83
3.85
3.88
3.90
3.92
3.94
3.96
3.98
4.00
4.02
4.04
4.06
4.08
4.10
2
3
4
5
6
7
8
1.4
2.1
2.9
3.6
4.3
5.0
5.7
6.4
7.2
7.9
8.6
96.6
97.3
98.0
98.8
99.5
100.2
100.9
101.6
102.3
103.1
103.8
104.5
105.2
105.9
106.6
107.3
108.1
108.8
109.5
110.2
110.9
111.6
112.4
113.1
113.8
114.5
115.2
115.9
116.6
117.4
118.1
118.8
119.5
120.2
120.9
121.7
122.4
123.1
123.8
124.5
125.2
126.0
126.7
127.4
128.1
128.8
129.5
130.2
131.0
131.7
132.4
133.1
133.8
134.5
135.3
136.0
136.7
137.4
138.1
138.8
139.5
140.3
141.0
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
9.3
10.0
10.7
11.5
12.2
12.9
13.6
14.3
15.0
15.7
16.5
17.2
17.9
18.6
19.3
20.0
20.8
21.5
22.2
22.9
23.6
24.3
25.0
25.8
26.5
27.2
27.9
28.6
29.3
30.1
30.8
31.5
32.2
32.9
33.6
34.4
35.1
35.8
36.5
37.2
37.9
38.6
39.4
40.1
40.8
41.5
42.2
42.9
43.7
44.4
45.1
45.8
46.5
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
343.5 10.00
344.2 10.02
344.9 10.04
345.6 10.06
346.4 10.08
347.1 10.10
347.8 10.13
348.5 10.15
349.2 10.17
349.9 10.19
32
DRZ9255
DRZ9255
33
Multi Mode
MEMO : SOUND SETUP MEMO
MEMORY1
MEMORY2
MEMORY3
Filter frequency(fc)
Slope
Gain
Hz
dB/oct
dB
HPF
Standard Mode
HIGH
Phase
NOR/REV
NOR/REV
NOR/REV
MEMORY1
MEMORY2
MEMORY3
Filter frequency(fc)
Slope
Filter frequency(fc)
Slope
Gain
Phase
Filter frequency(fc)
Slope
Filter frequency(fc)
Slope
Gain
Phase
Filter frequency(fc)
Slope
Filter frequency(fc)
Slope
Gain
Phase
Hz
dB/oct
Hz
dB/oct
dB
Filter frequency(fc)
Slope
Gain
Phase
Filter frequency(fc)
Slope
Gain
Phase
Filter frequency(fc)
Slope
Gain
Phase
Filter frequency(fc)
Slope
Filter frequency(fc)
Slope
Gain
Hz
dB/oct
dB
LPF
HPF
HPF
LPF
HPF
FRONT-HIGH
MID
NOR/REV
NOR/REV
NOR/REV
NOR/REV
NOR/REV
NOR/REV
NOR/REV
NOR/REV
NOR/REV
Hz
dB/oct
dB
NOR/REV
NOR/REV
NOR/REV
NOR/REV
NOR/REV
NOR/REV
FRONT-LOW
REAR
Hz
dB/oct
Hz
dB/oct
dB
LPF
HPF
Hz
dB/oct
dB
LOW
Hz
dB/oct
Hz
dB/oct
dB
Hz
dB/oct
Hz
dB/oct
dB
LPF
HPF
LPF
HPF
SUB-W
SUB-W
NOR/REV
NOR/REV
NOR/REV
Phase
NOR/REV
NOR/REV
NOR/REV
MEMORY1
MEMORY2
MEMORY3
MEMORY1
MEMORY2
MEMORY3
Lch
Rch
Lch
Rch
Lch
Rch
Lch
Rch
cm
cm
cm
cm
cm
cm
cm
cm
Lch
Rch
Lch
Rch
Lch
Rch
Lch
Rch
cm
cm
cm
cm
cm
cm
cm
cm
FRONT-HIGH
FRONT-LOW
REAR
HIGH
MID
TIME Alignment
TIME Alignment
LOW
SUB-W
SUB-W
MEMORY1
MEMORY2
MEMORY3
MEMORY1
MEMORY2
MEMORY3
Center frequency(fo)
Hz
dB
Center frequency(fo)
Hz
dB
BAND1
BAND2
BAND3
BAND4
BAND5
BAND1
BAND2
BAND3
BAND4
BAND5
Gain
BAND1
BAND2
BAND3
BAND4
BAND5
BAND1
BAND2
BAND3
BAND4
BAND5
Gain
Q
Q
Center frequency(fo)
Hz
dB
Center frequency(fo)
Hz
dB
Gain
Q
Gain
Q
Center frequency(fo)
Hz
dB
Center frequency(fo)
Hz
dB
Gain
Q
Gain
Q
LEFT
LEFT
Center frequency(fo)
Hz
dB
Center frequency(fo)
Hz
dB
Gain
Q
Gain
Q
Center frequency(fo)
Hz
dB
Center frequency(fo)
Hz
dB
Gain
Q
Gain
Q
Center frequency(fo)
Hz
dB
Center frequency(fo)
Hz
dB
Gain
Q
Gain
Q
Center frequency(fo)
Hz
dB
Center frequency(fo)
Hz
dB
Gain
Q
Gain
Q
Center frequency(fo)
Hz
dB
Center frequency(fo)
Hz
dB
RIGHT
RIGHT
Gain
Q
Gain
Q
Center frequency(fo)
Hz
dB
Center frequency(fo)
Hz
dB
Gain
Q
Gain
Q
Center frequency(fo)
Hz
dB
Center frequency(fo)
Hz
dB
Gain
Q
Gain
Q
34
DRZ9255
DRZ9255
35
|