Coleman Tent 2000004413 User Manual

SHELTER SETUP INSTRUCTIONS  
MODEL 2000004413  
• Pull up sliding bracket located on upper  
portion of leg until push button snaps into  
place. (Fig. 3) This will ensure upper portion  
Before you begin  
Read all instructions before set up.  
• Select a level site clear of rocks, branches, and other hard or  
sharp objects, to install your shelter.  
of frame is fully extended.  
WARNING: Keep clear of overhead power lines.  
• Do not set up your shelter under trees because of potential  
lightning strikes or falling tree limbs in inclement weather.  
• Secure with all stakes and guylines provided to prevent property  
damage or personal injury.  
Push  
Button  
Fig. 3  
HANDY TIP: To fully engage the  
push button, grip the top and bottom  
frame members and squeeze as  
shown in Fig. 3A. Be careful to avoid  
pinch points.  
• For best results in windy conditions, position narrow end of  
shelter into the wind.  
• Do not drop shelter.  
• Do not bounce shelter bag on its end to remove shelter, as these  
actions may damage the frame.  
• THIS RECREATIONAL PRODUCT REQUIRES A MINIMUM OF TWO  
PEOPLE TO ASSEMBLE.  
• Under no circumstances should this product be used to cover  
automobiles, marine products or similar items.  
CAUTION: Avoid pinch points when opening and closing the  
shelter frame.  
Fig. 3A  
• Secure shelter top to frame with nylon fasteners provided. (Fig. 4 & 5)  
Replacement Parts List  
Fig. 4  
Fig. 5  
Description  
Part Number  
Shelter Top  
5010000766  
Adjust the Height  
• Adjust desired height until push button locks into place, making  
sure all four posts are level. (Fig. 6 & 7)  
Extend the Shelter Frame  
3
• With two persons standing at diagonal corners of the structure,  
grab the leg, and pull out to unfold frame. (Fig. 1)  
NOTE: Do not unfold frame completely. This will allow easier fit  
for draping shelter top over frame.  
1
2
Upper  
Portion  
of Leg  
Push  
Button  
Push  
Button  
Fig. 6  
Fig. 7  
Install the Screen  
Unroll screen house and wrap around outside frame posts and  
under the shelter top. Locate zippers per illustrations. (Fig. 8)  
Attach top of screen to frame with hooks and loops  
provided. (Fig. 9 & 10)  
Fig. 1  
4
NOTE: Shelter should be set at the highest  
position when used with screen house.  
Set up the Shelter  
• Drape shelter top over frame. (Fig. 2)  
• Attach nylon fasteners, located on corners of shelter top, to six  
corners of frame post. (Fig. 2A)  
Fig. 9  
Fig. 8  
2A  
Fig. 10  
Zippers  
Fig. 2  
(continued on other side)  
 

Coleman Camping Equipment 4010002738 User Manual
Crate Amplifiers Stereo Amplifier G160 XL User Manual
Crosley Radio Car Stereo System CR02 001A User Manual
Dimension One Spas Hot Tub Aurora HP User Manual
EverFocus Security Camera EHD320 User Manual
EVGA Computer Hardware 122 YW E173 User Manual
Frigidaire Clothes Dryer 131956700A User Manual
Fundex Games Board Games 0873 User Manual
GBC Laminator 3064WF User Manual
Generac Power Systems Portable Generator A 2624 User Manual