Replacing the Battery
Your Rz2 remote control comes with one CR2032 battery which must be installed.
When the range of the remote seems reduced or if it ceases to work properly, it’s time
to replace the battery.
Battery compartment
cover
1. Slide battery compartment cover on rear of remote
control off (remove old battery if replacing).
2. Place new CR2032 in battery well as shown
(make sure +/- polarity matches markings).
3. Replace battery compartment cover.
Rz2
WARNING: Lithium batteries can explode or cause burns
if disassembled, shorted, recharged, exposed to water,
fire, or high temperatures. Do not place loose batteries in
a pocket, purse, or other container containing metal
objects, mix with used or other battery types, or store with
hazardous or combustible materials. Store in cool, dry,
ventilated area. Follow applicable laws and regulations
for transport and disposal.
Troubleshooting
Problem: Remote doesn’t work
Solutions:
bass
treble
A. Make sure you are within 15 feet of the unit and that the remote is pointed at the
front of the unit.
B. Try replacing the battery (see above).
reset
For customer service, contact us toll free at 1-800-288-2792
Rz2
remote control
instruction booklet
RZ2 IB-121610-A(iP2/iP3)
3
Printed in china
Unit Controls
iPhone/iPod Controls
iPhone/iPod Controls
Play/Pause Button
Power Button
• Switches iPhone or iPod between Play and Pause modes
• Turns unit ON or OFF.
Track Buttons
• Skip to next or previous track
• HOLD to scan reverse or forward within a track
Lower/Raise Volume
• Raises or lowers volume
of the unit
Shuffle Button
• Play tracks randomly from the selected playlist
Mute Button
• Mute ON/OFF
mute
Repeat Button
• Repeat the currently playing track
Plus/Minus Bass Buttons
• Raises and lowers bass
settings
bass
bass
treble
reset
Plus/Minus Treble Buttons
• Raises and lowers treble
settings
treble
Rz2
Bongiovi DPS Button
• Turns Bongiovi Digital
Power Station processing
circuit on and off
Reset Button
• Quickly resets bass and
treble to default settings
reset
NOTE: this remote control may have features and functions
that don’t apply to or work with your particular iHome model.
2
1
|