IB109B/IB109BU/IB109P/IB109PR
Portable Dock for iPod with Radio
TA B L E O F C O N T E N T S
Important Safety Instructions
1. Read Instructions - All the safety and operating
instruction should be read before the product is
operated.
into the outlet, contact your electrician to replace
your obsolete outlet. Do not defeat the safety
purpose of the grounding-type plug.
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions as an improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician to
restore the product to its normal operation.
2. Retain Instructions - The safety and operating
instruction should be retained for future reference.
13. Power-Cord Protection - Power supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them, paying particular attention to cords
at plugs, convenience receptacles, and point where
they exit from the product.
3. Heed Warnings - All warning on the product and
in the operating instructions should be adhered to.
e) If the product has been dropped or damaged in
any way, and
4. Follow instructions - All operating and use
f) When the product exhibits a distinct change in
performance - this indicates a need for service.
instructions should be followed.
14. Protective Attachment Plug - The product is
equipped with an attachment plug having overload
protection. This is a safety feature. See Instruction
Manual for replacement or resetting of protective
device. If replacement of the plug is required, be
sure the service technician has used a replacement
plug specified by the manufacturer that has the
same overload protection as the original plug.
5. Cleaning - Unplug this product from the wall
outlet before cleaning. Do not use liquid cleaners
or aerosol cleaners. Clean only with a dry cloth.
22. Replacement Parts - When replacement parts are
required, be sure the service technician has used
replacement parts specified by the manufacturer
or have the same characteristics as the original
part. Unauthorized substitutions may result in fire,
electric shock, or other hazards.
6. Attachments - Do not use attachments not
recommended by the product manufacturer as they
may cause hazards.
23. Safety Check - Upon completion of any service or
repairs to this product, ask the service technician
to perform safety checks to determine that the
product is in proper operating condition.
7. Water and Moisture - Do not use this product
near water - for example, near a bath tub, wash
bowl, kitchen sink, or laundry tub; in a wet
basement, or near a swimming pool, and the like.
The apparatus shall not be exposed to dripping or
splashing and that no objects filled with liquids,
such as vases, shall be placed on apparatus.
15. Outdoor Antenna Grounding - If an outside
antenna is connected to the receiver, be sure the
antenna system is grounded so as to provide some
protection against voltage surges and built-up static
charges. Article 810 of the National Electrical
Code, ANSI/NFPA 70, provides information
with regard to proper grounding of the mast and
supporting structure, grounding of the mast and
supporting structure, grounding of the lead-in wire
to an antenna-discharge unit, size of grounding
conductors, location of antenna-discharge
24. Wall or Ceiling Mounting - The product
should be mounted to a wall or ceiling only as
recommended by the manufacturer.
L’appareil ne doit pas être exposê aux écoulements
ou aux éclaboussures et aucun objet ne contenant
de liquide, tel qu’un vase, ne doit être placé sur
l’objet.
25. Heat - The product should be situated away from
heat sources such as radiators, heat registers,
stoves, or other products (including amplifiers)
that produce heat. Battery shall not be exposed to
excessive heat such as sunshine, fire, or the like.
unit, connection to grounding electrodes, and
requirements for the grounding electrode.
8. Accessories - Do not place this product on an
unstable cart, stand tripod, bracket, or table. The
product may fall, causing serious injury to a child
or adult, and serious damage to the product. Use
only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with
the product. Any mounting of the product should
follow the manufacturer’s instructions, and should
use a mounting accessory recommended by the
manufacturer.
Les piles ne doivent pas être exposées à de forte
chaleur, tel qu’à la lumière du soleil, au feu ou
autres choses de semblable.
See figure:
16. Lightning - For added protection for this product
during a lightning storm, or when it is left
unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent damage
to the product due to lightning and power-line
surges.
26. Main plug is used as disconnect device and it
should remain readily operable during intended
use. In order to disconnect the apparatus from
the mains completely, the mains plug should
be disconnected from the mains socket outlet
completely.
9. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
17. Power Lines - An outside antenna system should
not be located in the vicinity of overhead power
lines or other electric light or power circuits, or
La prise du secteur ne doit pas être obstruée
ou doit être facilement accessible pendant son
utilisation. Pour être complètement déconnecté
de l’alimentation d’entrée, la prise doit être
débranchée du secteur.
See figure:
27. Excessive sound pressure from earphones and
headphones can cause hearing loss.
10. Ventilation - Slots and openings in the cabinet
are provided for ventilation and to ensure reliable
operation of the product and to protect it from
Des pressions acoustiques excessives provenant
d’écouteurs ou de casques peuvent provoquer des
pertes de l’audition.
28. To prevent fire or shock hazard, do not use this
plug with an extension cord, receptacle or other
outlet unless the blades can be fully inserted to
prevent blade exposure.
where it can fall into such power lines or circuits.
When installing an outside antenna system,
extreme care should be taken to keep from
touching such power lines or circuits as contact
with them might be fatal.
overheating, and these openings must not be
29.
Symbol is used to indicate that a
specific component shall be replaced
only by the component specified in that
documentation for safety reasons.
blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug,
or other similar surface. This product should not be
placed in a built-in installation such as a bookcase
or rack unless proper ventilation is provided or the
manufacturer’s instruction have been adhered to.
18. Overloading - Do not overload wall outlets,
extension cords, or integral convenience
receptacles as this can result in a risk of fire or
electric shock.
30.
This symbol indicates that this product
incorporates double insulation.
19. Object and Liquid Entry - Never push objects of
any kind into this product through openings as they
may touch dangerous voltage points or short-out
parts that could result in a fire or electric shock.
Never spill liquid of any kind on the product.
11. Power Sources - This product should be operated
only from the type of power source indicated on
the marking label. If you are not sure of the type of
power supply to your home, consult your product
dealer or local power company. For products
intended to operate from battery power, or other
sources, refer to the operating instruction.
31. Caution marking is located at the bottom of
apparatus.
Les précautions d’emploi sont inscrites en bas de
l’appareil.
20. Servicing - Do not attempt to service this product
yourself as opening or removing covers may
expose you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
32. The marking information is located at the bottom
of apparatus.
12. Grounding or Polarization - This product may
be equipped with a polarized alternating-current
line plug (a plug having one blade wider than the
other). This plug will fit into the power outlet only
one way. This is a safety feature. If you are unable
to insert the plug fully into the outlet, try reversing
the plug. If the plug should still fail to fit, contact
your electrician to replace your obsolete outlet. Do
not defeat the safety purpose of the polarizes plug.
Les marquages sont inscrits en bas de l’appareil.
21. Damage Requiring Service - Unplug this product
from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
a) When the power-supply cord or plug is
damaged,
b) If liquid has been spilled, or objects have fallen
into the product,
Alternate Warnings - This product is equipped
with a three-wire grounding-type plug, a plug
having a third (grounding) pin. This plug will only
fit into a grounding-type power outlet. This is a
safety feature. If you are unable to insert the plug
c) If the product has been exposed to rain, water
or moisture.
d) If the product does not operate normally by
3
In the Box
Features
• IB109
Docking Station for iPod®
• Auto-Power Off for iPod
• AM/FM Radio with Direct Tuning
• Line-In Jack for other Audio Players
AC/DC Powered:
• Detachable AC Cord
• Documentation
• AC: 110V Detachable AC Line Cord
• DC: Uses 6-”C” size Batteries, (not
included)
Powering the Unit
To power the unit, plug the included AC cord into a standard AC outlet
(120V~60Hz).
AC
The unit can also be powered
by batteries. (Requires 6 C size
batteries, not included.
1.5Vx6(UM-2,
LR14, SIZE)
C
AC
Do not mix old and new
batteries.
Do not mix alkaline, standard
(carbon-zinc), or rechargeable
(ni-cad, ni-mh, etc) batteries.
4
Docking an iPod
Step 1: Turn the Adjustable Dial for iPod until the arrow on the dial is pointing to the listed iPod
model to be docked.
•
iPod models and memory sizes that are not listed on the Dock Adjustment Dial can be
docked by manually adjusting the dial to the depth that fits the iPod best.
Step 2: Connect the iPod to the iPod connector inside the Dock for iPod.
•
When the unit is plugged in, using AC power, the docked iPod will charge. If the unit is
running on batteries, DC power, the docked iPod will not charge.
Playing an iPod
Step 1: After docking an iPod, adjust the Power Switch to the On position.
Step 2: Adjust the Source Switch (FM,AM,iPod,Aux In) to the iPod position.
Step 3: Press the Play/Pause Button to begin playing the docked iPod.
Tuning the Radio
Step 1: Adjust the Power Switch to the On position.
Step 2: Adjust the Source Switch (FM,AM,iPod,Aux In) to the FM or AM position.
Step 3: Turn the Tuning Dial to the desired station.
Step 4: Extend the FM Antenna to improve FM radio reception.
•
An AM antenna is built into the unit. Adjust the unit to improve AM radio reception.
Using the Auxiliary Input
Step 1: Connect an MP3 player or other audio source to the Auxiliary Input.
•
This requires a 3.5mm auxiliary input cable, not included.
Step 2: Adjust the Power Switch to the On position.
Step 3: Adjust the Source Switch (FM,AM,iPod,Aux In) to the Aux In position.
Step 4: Audio played from the connected MP3 player or other audio source will now be heard
through the unit’s speakers.
5
Control Definitions
1.
Adjustable Dial for iPod
Turn the Adjustable Dial for iPod to the desired iPod model to be docked.
Dock for iPod
2.
Use the Dock for iPod to connect an iPod to the unit.
Battery Compartment (Requires 6 C batteries, not included)
Power Switch
3.
4.
Adjust the Power Switch to turn the unit off and on.
Source Switch
5.
6.
7.
8.
Adjust the Source Switch to change between AM, FM, iPod, and Auxiliary Mode.
Auxiliary Input
Use the Auxiliary Input to connect an external audio source, like an MP3 player, to the unit.
Volume Dial
Turn the Volume Dial to adjust the volume of the unit.
FM Antenna
Extend the FM Antenna to improve FM radio reception.
An AM antenna is built into the unit. Adjust the unit to improve AM radio reception.
Power Indicator
9.
The Power Indicator illuminates when the unit is powered on.
Skip/Search Buttons
10.
Press the Skip/Search Buttons to skip between tracks on a docked iPod.
Press and hold the Skip/Search Buttons to search through an individual song on a docked iPod.
Play/Pause Button
11.
12.
Press the Play/Pause Button to play or pause a docked iPod.
Tuning Dial
Turn the Tuning Dial to adjust the unit’s current AM or FM radio station.
7
Parts Information
Address: 2116 Carr Street, St. Louis MO, 63106
Phone: 1-314-621-2881
Fax: 1-314-588-1805
Email: [email protected]
Service Information
Address: 2116 Carr Street, St. Louis MO, 63106
Phone: 1-314-621-2881
Fax: 1-314-588-1805
Email: [email protected]
Website: www.ilive.net
Version: v. 052609
To download this Instruction Manual in English, Spanish, or French visit the Support
Para descargar este manual de instrucción en inglés, español, o francés visite la sección
Pour télécharger ce manuel d’instruction en anglais, espagnol, ou le Français visitez la
© 2009 Digital Products International (DPI, Inc.)
All other trademarks appearing herein are the property of their respective owners.
|